HZJ75 Suspension lift

[Spicy]

Have a 75 series ute (Australian build) and am looking for the maximum height specifications so as to plan the lift to comply with Australian modification regulations - can anyone help

 

[Clint79]

What size tyres are you running and what state in Aus are you

 

[wongtsenhin]

How much maximum do you want???

 

[Spicy]

I'm thinking of using 33's but need the standard height specs to work out spring height. I live in WA and they allow 50 mm above factory height (to the highest point on the roof)

 

[wongtsenhin]

I'm thinking of using 33's but need the standard height specs to work out spring height. I live in WA and they allow 50 mm above factory height (to the highest point on the roof)

Clint! Same place as you WA.

 

[Spicy]

Greg! Hi Clint, any ideas on on the lift specs?

 

[Clint79]

Greg! Hi Clint, any ideas on on the lift specs?

you kind of answered your own question if you go a 2" lift legally you have to run the std pizza cutter tyres as that's your floor to roof 50mm height gain.
You leafs have also proberly sagged a bit
Malaga springs and suspention sell the dobs brand
Also depending on what weight you carry in the back and how often , don't forget company's that make a "heavy duty " leaf pack for cruisers and patrol seem to get really excited and put 10times the amount of leafs in more than they need,

Personally If i was in you sittuation i would buy a 2" lift and some 33s, I highly doubt you will every get looked at twice , unless you have 30 spotties on you bulbar or very dark tint

 

[Spicy]

Thanks, I think that's what I will do