How much Rust Bullet?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 28, 2004
Threads
55
Messages
179
Location
Philadelphia, PA
For those of you who have coated your underside and frame, how much did you end up using given that it requires two coats?
 
Rust bullet amounts

Okay, I didnt do a frame, but I did do the entire inside of my 55 from firewall to tailgate and about 4" up the sides. It does take 2 coats, and I used a quart and had a splash left. It is pretty thin and I applied it with a roller and small brush. Hope that helps. Hodag
 
Get 2 Quarts

I used just a tad more than a quart to to the entire inside of my tub and front fender wells. You'll have plenty if you get 2 quarts and will probably end up buying more after you see the results of this stuff. I researched for a long time and then bought a quart to try out on my fender herculining project and have since stripped my entire tub/cowl to bare metal and HVLP sprayed it with bullet. I should probably post up my results after I get my digi cam back from my bro. Just make sure to use it outside with a respirator or itll have you feelin kinda funny.
 
"Just make sure to use it outside with a respirator or itll have you feelin kinda funny." It that a bad thing. ;) I would love to see some pics. I plan on repainting my 40 this winter.
 

Users who are viewing this thread

Back
Top Bottom