anyone know where to bolt on the fj62 rear swaybar on to the fj60? thanks!
help?
- Thread starter mudbutcher
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
There are two frame mounts and your frame may have the holes or you may need to drill them. The axle mounts I'm not so sure on. I think you might ahve to fab those.
- Thread starter
- #3
thanks randy! cruiserparts.net said it would be a direct bolt on. what I have is an 84 fj60 totally restored with a soa and old man emu leafs and shocks so it is quite high! any chance of a picture to have a rough idea where to look or drill or mount?
You should learn to use the search function! Here's a thread with some pictures: https://forum.ih8mud.com/60-series-wagons/100440-rear-sway-bar-82-fj60.html
The ends of the sway bar bolt to brackets that bolt onto the frame. You will also need some square brackets welded onto the axle housing to hold the bar to the axle. My '85 FJ60 already had the axle brackets. I don't know if your '84 does. You can see the location of where the brackets should be in the pictures in the thread.
The ends of the sway bar bolt to brackets that bolt onto the frame. You will also need some square brackets welded onto the axle housing to hold the bar to the axle. My '85 FJ60 already had the axle brackets. I don't know if your '84 does. You can see the location of where the brackets should be in the pictures in the thread.
Last edited:
- Thread starter
- #5
thanks 2mbb! I did try a search but apparently with out any luck. thanks for the link!
