help with permanent power window fix

[bukeyechad]

ok. so i bought the relay and started fixing passenger front window. have not done the power locks yet.
i wired up the window per slc's thread with the same relays he used. turned car on and it wouldnt work....tried another door and it still worked. so i took the newly wired door panel off and saw that one of the blue wires that connects to a red on the relay had come undone so i reconnected it and still didnt work.....now none of the windows work!! checked fuse box and no bad fuses...

totally lost...please help

chad

 

[mwood5]

Did you first put direct battery power to the lock motors to see if they worked?

m

 

[bukeyechad]

locks still work...and windows worked before i started messing with it

 

[alaska60]

Start over.......
Your missing something simple.
Start from the beginning again.

 

[slcfj62]

Take a good picture of the switch and relays and post it up so we can see how it is wired. The power windows circuit is protected by a circuit breaker, not a fuse. I have never had to reset the windows circuit breaker, so I can't help you find it. When you do find it, if it is like the power door locks circuit breaker, you reset it with a paper clip in the hole.

 

[bukeyechad]

got to be a circuit breaker issue......i even undid all the new wiring and did as original and still didnt work.....would circuit be in fsm??

 

[slcfj62]

I couldn't find the location shown in the FSM. Maybe I don't know where to look. There are two circuit breakers on the right side of the fuse panel. I'd start with them. Stick a paper clip in the hole.

 

[bukeyechad]

fsm shows a relay on driver window motor.....i am assuming that is it???? what do you think??

 

[slcfj62]

No, that is not the circuit breaker, that is the drivers window relay. You are looking for a circuit breaker that will look something like the two circuit breakers on the right side of the fuse panel.

 

[bukeyechad]

ok....will check it out sunday. going out of town for weekend.. thx for all the assistance

chad

 

[Cruzerman]

Wires? Relays? Motors? You 62 guys and your power windows.

 

[slcfj62]

Wires? Relays? Motors? You 62 guys and your power windows.

You forgot the "Oh My!" part. And the power windows and door locks are awesome--60 series style with modern conveniences. What's not to love about that?

 

[Cruzerman]

You forgot the "Oh My!" part. And the power windows and door locks are awesome--60 series style with modern conveniences. What's not to love about that?

What's not to love? Wires, relays, motors...

 

[bukeyechad]

yep...it was the circuit breaker thingy next to fuses....the bottom one

thx for all the help

chad

 

[slcfj62]

That means you wired something up wrong when you did the relays. When you do it again, post up a pic of how you have the relays wired before you install the switch back in your landcruiser so we can take a quick look. I messed up on the power door locks my first attempt and wound up resetting the power door locks circuit breaker. It happens.

 

[slcfj62]

Hey Chad--Were you successful getting the relays wired up for your power windows? Hopefully you didn't get spooked by your first attempt.