Help with Part Numbers for Vacuum Hoses (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 26, 2019
Threads
8
Messages
56
Location
SoCal
Hello,

I've searched on this forum, searched on Camelback Toyota, and even went to my local dealership (they ordered me the wrong part). I cannot figure out the part number for these three hoses. I would like to keep them OEM, so I want to stay away from Autozone, etc if I can. Thanks.

1998 Land Cruiser

VacHose.jpg


Vac Diagram.jpg
 
For build dates up to 8/98:

The hoses on the right side of the diagram (coming off the canister and before the vacuum switching valve) come as one assembly including the internal clamps: 7775460231 (7775460230 has been superseded).

Edit: You could probably use 7775460240 if you want. That's what's represented in the parts diagram in case you are wondering what the extra segments to that hose assembly are. 7775460240 is newer and adds some sort of green port inline with the hoses. Maybe someone can explain what it does. If it's useful then the newer part might be considered an upgrade.

The clamps at the ends of the first and last hose are now: 9613251300

The hose that connects to the upper intake manifold near the throttle body is: 2382950070

Again, its two clamps are: 9613251300

I just replaced these hoses on a 98. Can confirm they work.

WO4vD4k.png


cmpFAuA.png
 
Last edited:
For build dates up to 8/98:

The hoses on the right side of the diagram (coming off the canister and before the vacuum switching valve) come as one assembly including the internal clamps: 7775460231 (7775460230 has been superseded).

Edit: You could probably use 7775460240 if you want. That's what's represented in the parts diagram in case you are wondering what the extra segments to that hose assembly are. 7775460240 is newer and adds some sort of green port inline with the hoses. Maybe someone can explain what it does. If it's useful then the newer part might be considered an upgrade.

The clamps at the ends of the first and last hose are now: 9613251300

The hose that connects to the upper intake manifold near the throttle body is: 2382950070

Again, its two clamps are: 9613251300

I just replaced these hoses on a 98. Can confirm they work.


Thanks so much! Just to be clear, the two part numbers below is what I need to order to get the 3 Hoses? Thanks.
7775460231
2382950070

Also, my local dealership did order me the 7775460240, but it did not look like it would work because it looked way too short. Or is it only the hose from the canister to the switching valve?
 
Yeah I think we're on the same page. 7775460231 or 7775460240 goes from the canister to the switching valve. Both are made up of two hoses with a little box in the middle. 7775460240 also has a green port on it near the canister like in the photo below (so three hoses, technically). It has plenty of room to go from the canister to the switching valve. Then from the valve to the intake manifold is 2382950070.

1544739897916_default.jpg
 
Yeah I think we're on the same page. 7775460231 or 7775460240 goes from the canister to the switching valve. Both are made up of two hoses with a little box in the middle. 7775460240 also has a green port on it near the canister like in the photo below (so three hoses, technically). It has plenty of room to go from the canister to the switching valve. Then from the valve to the intake manifold is 2382950070.

1544739897916_default.jpg
So since the dealership already ordered me the 7775460240, I just need the last hose, which is 2382950070. Thanks again for your help.
 

Users who are viewing this thread

Back
Top Bottom