Help! Post Pics of your aftermarket (custom made) Seat mounting brackets

[90 Weight]

I am getting to the point where I need to install some aftermarket seats. I plan on getting the chepo 5 point rally style ones from my local parts store. I know ive stumbled across alot of picutres of cool custom made mounting systems, whether tube or square. If you have pics or have links to picutres of these I would greatly appretaite it. I am just looking to get some ideas to give to my welder.

Thanks


Eli

 

[mikedickbek]

I forget, did you get a long range tank that the seats mount to, or do you want the seats mounted to the floor like the stock set-up? I've got the seats mounted to the long range tank, so I'll go get some pics if that's what you're doing.

Nevermind. I just checked out your build-up thread...

 

[markuswithak]

Here is what I did, mounted 2002 Honda Accord seats to it

 

[90 Weight]

Thanks.


Cmon guys, I know there are alot of you out there with custom seat mounts!

 

[corsair23]

Sorry, no pic of it in the vehicle but here is what the PO put in my 40 to mount up some Recaro seats...

Seat frame

 

[cruiserfreek]

seat braket

didn't want to make a big fuss out of installing new seats, didn't want any frames or major changes and metal works, so i adapted the seats to the stock tub but since they where wider than the original seats, I added an extra part with a perforated hole to fit the screw. it is reinforced by the bents on both sides so no scare of bending or breaking. 1000% guaranteed. by the way my seats are 1995 BMW serie 5 seats.

want additional pics please send request to my mail, landcruiser83@gmail.com since i got limited upload space. not paying my subscription yet.

 

[dustin]

not sure if you have a full cage. but when I had my cage built, they built a tray, then welded legs to it with tabs on the cage- bolting it all together.


cheers-
Dustin

 

[B6i6K6e6R6b6O6y]

hey markuswithak what is the size of metal you used? and do you have any other pics?

 

[Vitesse_6]

Here is what I have, You can see the front seat mounts along with the rear. It goes over the tool kit box and tank.
Good luck
Here is a bit more info https://forum.ih8mud.com/showthread.php?t=91544

 

[MTPCRUISER]

Here is what I have, You can see the front seat mounts along with the rear. It goes over the tool kit box and tank.
Good luck

Wow, that is some cage. Hardly need a body, just install the seats, attach it to the frame and off you go.

 

[Vitesse_6]

Wow, that is some cage. Hardly need a body, just install the seats, attach it to the frame and off you go.

Thanks, But I have 2 kids and a wife, I need something to keep the snow/mud off them

 

[B6i6K6e6R6b6O6y]

anyone eles have any more pics? I'm about to build some seat brackets as well.