I picked up a LX470 a few months ago that came with an ABS delete. The master brake cylinder in it seems to have failed earlier this week. I am trying to identify what brake cylinder is in the truck but when I google the letters/number stamped on it, they don't seem to be a part number. It also looks like there is a brake booster from another vehicle as well. Any help identifying the brake cylinder or tips for how to better fix the brakes now that the installed system is broken are appreciated. Cheers!
Help identifying master cylinder
- Thread starter rtbwmu
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
put you VIN in on Partsouq and you'll have no problem finding it.
I was just looking these parts up the other day since I want to convert mine into a vacuum assist set-up.
This is what I got but was for a Mid-east spec but should be equivalent....47201-60720
I was just looking these parts up the other day since I want to convert mine into a vacuum assist set-up.
This is what I got but was for a Mid-east spec but should be equivalent....47201-60720
- Thread starter
- #4
I didn't think these trucks came stock with master cylinders like that? Since they had the whole ABS pump thing from the factory.
Deleting the abs unit as well, like a lot of theGulf Corporation Council units. They were not equipped with abs, I don't believe yours is either.
My LX has had a failed abs module for a while now and it's not something I worry about having. My last daily was a BMW 540 with a failed module for 3 years. In fact, most of the vehicles I've owned over the last 30 years, street and track, were not equipped with abs or deleted.
My LX has had a failed abs module for a while now and it's not something I worry about having. My last daily was a BMW 540 with a failed module for 3 years. In fact, most of the vehicles I've owned over the last 30 years, street and track, were not equipped with abs or deleted.
- Thread starter
- #6
cool, so are you just replacing with 105 series booster and master cylinder? When I google that part number it looks like that's what it comes back as.
Yep, basically the plan. The 100 and 105 probably used the same units. Go to partsouq and put your vin in to see if what you get matches what you have found elsewhere.
PartSouq Auto Parts Around the World
We present to your attention our wide range of quality auto parts for many brands of cars. Our genuine parts catalogs and search by part number will help you!
Trunk Monkey
Moderator
Looks like a Tacoma MC.
- Thread starter
- #9
Yeah I tried. Unless I'm doing something wrong it's not coming up with anything unfortunately.Yep, basically the plan. The 100 and 105 probably used the same units. Go to partsouq and put your vin in to see if what you get matches what you have found elsewhere.
PartSouq Auto Parts Around the World
We present to your attention our wide range of quality auto parts for many brands of cars. Our genuine parts catalogs and search by part number will help you!partsouq.com
- Thread starter
- #10
I just pulled it off and threw it in a big ziplock. Gonna try brining it with me to an autoparts store tomorrow to see if they can match it with something in stock.
hoser
SILVER Star
You can DM me the VIN and I'll tell you what it came with. PR vehicles were different than mainland US. Probably no NAV and no rear heat too?
- Thread starter
- #12
No nav but does have a rear heater. I'll DM you. Thanks!
- Thread starter
- #13
Here is a photo of the front part of it that goes into the brake booster. I cannot find another master cylinder with a front like that except for some 80 series ones but those have 4 bolt patterns instead of 2 and the electronics are in a different location.
- Thread starter
- #14
Wait, I might have it identified. Looks very similar to 3rd V6 4runners w/o ABS.
