Hello need a little help in Portland OR. area

[Dan_J-spec_fj62]

does any one have an extra 94 runner Trasfer case crossmember or know a good pick and pull with a 4 runner or 2 in it?? My llittle brother taco'ed his!! see attached pic... or a sugestion on how to straighten his!

thanks

dan


err i'll attach a pic as soon as i clear my old pics

 

[Dan_J-spec_fj62]

i should add he did this "urban Wheeling" somthing about an 18 inch parking lot to street drop??? i don't know if he went off backwards or forwards???

any help would be fantastic!!!



thanks

dan


Hey mods... i don't mean this to be chatty but if you think is please moveit...

any sugestions on a new crosmember style would be cool too..

 

[WristPin]

i will be scrapping a 94 4runner sunday. I live in vancouver, so we could hook up.
how much are you going to spend on it?

 

[WristPin]

wait a minute....

that crosmember looks DAMN familliar.
is this your kid brother??

 

[Dan_J-spec_fj62]

nope.. not my bro, and i don't know what he wants to spend... my guess is the cheeeper the better... he's in college... and he might need the rear driveshaft also... i'll send you a pm


thanks

dan

 

[MT-4Run]

straitened out

So the final diagnosis for my prob ended up being a thrashed U joint. I got a freebee driveshaft from my girlfriend's son's babysitter's boyfriend who's built several 94 runners. Crossmember isn't causing a serious problem at this point. Thanks for looking everybody. And thanks bro for lookin into it.


-Joe

 

[Eric Winkworth]

I was gonna say it didn't look to bad, You might wanna find a stright one for when ever the tranny mounts need replacing, but until you get some serious transmission stick movement, or problems staying in gear I wouldn't be to conserned, go see if she will bend some more.