Wanted H55F

[jimmyt]

Looking for H55F transmission transfer case and bell housing for 1HZ diesel
Will consider all options.

Thanks,

Jim

 

[mike]

I have the 5spd/transfercase from 87hj60 .. will this work

 

[jimmyt]

Hi Mike,

Was this coupled to a gas or diesel? either way it should work, would be a bell housing and possibly a main shaft change. Is the transfer case a split case? Any idea as to miles/kilometers? What is your price and can it be shipped?

Thanks,

Jim

 

[mike]

from a 2h diesel. it had 300000 kilometers on it. it was functioning fine. I do not have the bell housing. shipping this would be expensive through regular methods. I think cargo would probably be best. I'm not sure if it split I can give some pictures. what's your email address? looking to get 1000 for the pair.

 

[OGBeno]

These can all be had new from Toyota here in North America.

 

[jimmyt]

These can all be had new from Toyota here in North America.

Hi Beno.

At what price???

 

[jimmyt]

from a 2h diesel. it had 300000 kilometers on it. it was functioning fine. I do not have the bell housing. shipping this would be expensive through regular methods. I think cargo would probably be best. I'm not sure if it split I can give some pictures. what's your email address? looking to get 1000 for the pair.

Mike, email is jschmid010@gmail.com

 

[Indygbd]

About 4,500.00 new

 

[OGBeno]

About 4,500.00 new

For an H55F transmission, bell housing and correct input shaft?

Um. No.

 

[joekatana]

FYI If I am correct the 2H uses the coarse spline shaft so you might want to find one from a BJ 60/70 or if possible the correct one from a HZJ70.

If you are not in a hurry I can bring one from Europe,I have a HZJ70 sitting there with a bad engine and am willing to sell that transmission plus all parts that you need separate but ETA on those parts will be August.

Joe

 

[OGBeno]

Hi Beno.

At what price???

Please contact me via email if you would like to go the new route: onurazeri1@gmail.com Joe's used one will probably be a good choice to if you want to go that route.

 

[Indygbd]

Transmission Part Number: 33030-60450 Dealer Cost $1,918.61
Transfer Case Part Number: 36110-6E181 Dealer Cost $1,892.60
Bell Housing Part Number: 31111-60230 Dealer Cost $448.11
Plus you need shifter and a few other pieces.

 

[greenbeast]

Onur
Thanks for chiming in, I sent PM directing him your way. Hope it works out!
JH

 

[jimmyt]

FYI If I am correct the 2H uses the coarse spline shaft so you might want to find one from a BJ 60/70 or if possible the correct one from a HZJ70.

If you are not in a hurry I can bring one from Europe,I have a HZJ70 sitting there with a bad engine and am willing to sell that transmission plus all parts that you need separate but ETA on those parts will be August.

Joe

FYI If I am correct the 2H uses the coarse spline shaft so you might want to find one from a BJ 60/70 or if possible the correct one from a HZJ70.

If you are not in a hurry I can bring one from Europe,I have a HZJ70 sitting there with a bad engine and am willing to sell that transmission plus all parts that you need separate but ETA on those parts will be August.

Joe

Joe,

Please contact me via email @ jschmid010@gmail.com about your transmission etc.

Thanks,

Jim