Wanted H55F Input shaft

[orangefj45]

The later shafts would require:
1) larger input bearing
2) larger input seal
3) late model front bearing retainer
4) bearing retainer gasket
5) machining the transmission case to accept the larger bearing

........

Georg @ Valley Hybrids & Cruiser Brothers

 

[lynchmob]

The later shafts would require:
1) larger input bearing
2) larger input seal
3) late model front bearing retainer
4) bearing retainer gasket
5) machining the transmission case to accept the larger bearing

........

Georg @ Valley Hybrids & Cruiser Brothers

OR You could use the following

Early H55 input bearing
Shim to match the shoulder on the early input shaft
Later model input shaft with seal surface turned down to early diameter
H42 input retainer housing from a 2F H42

 

[tstepp920]

my brain hurts......no wonder people abandon this modification. I have a 5/80 2F. I have a H55F from a 1982 March of 1984 BJ42. I have found the input shaft new OEM , .....I think.
Now you are talking bearing retainer ( I have no clue) and machining t-cases. . You guys are lapping me while I am still in first gear.
Is there a thread where someone has actually done the swap for the diesel /gas input shaft using an early H55F?
Don't bail on me guys. Some good will come out of this.


Mods can move this to the Tech Forum if you wish.

 

[dieselbj42]

I have some NOS genuine input shafts available, # 33311-60070,
235 Euro including shipping.

 

[tstepp920]

Can someone tell where I would find an ID code or MFG date code on the Transmission in my photos. Before I order the wrong part. Thanks

I found the mfg. date code. My 1982 H55F w/ TC is actually a March of 1984

 

[win912]

I have some NOS genuine input shafts available, # 33311-60070,
235 Euro including shipping.

View attachment 1762087

I have some NOS genuine input shafts available, # 33311-60070,
235 Euro including shipping.

View attachment 1762087

Is this input shaft still available?

 

[dieselbj42]

Yes still available

 

[orangefj45]

I got my OEM Toyota 60070 input shaft from @dieselbj42 he’s a GREAT guy to deal with.

We also have the SeaMaster shafts in stock.

Georg @ Valley Hybrids & Cruiser Brothers
Shop 209-475-8808

 

[Living in the Past]

my brain hurts......no wonder people abandon this modification. I have a 5/80 2F. I have a H55F from a 1982 March of 1984 BJ42. I have found the input shaft new OEM , .....I think.
Now you are talking bearing retainer ( I have no clue) and machining t-cases. . You guys are lapping me while I am still in first gear.
Is there a thread where someone has actually done the swap for the diesel /gas input shaft using an early H55F?
Don't bail on me guys. Some good will come out of this.


Mods can move this to the Tech Forum if you wish.

View attachment 1762416

Not sure the question of your input shaft bearing retainer was ever answered? The input retainer off you 80 model H42 will work. The one from the 74 H42 to the 9/85 H42 imported to the US will work.

 

[win912]

Received input shaft From dieselbj42 ....part is perfect! Thank You!

 

[cruiseroutfit]

I have some NOS genuine input shafts available, # 33311-60070,
235 Euro including shipping.

View attachment 1762087

Still have any of these available?

 

[dieselbj42]

Yes. Please PM me.

 

[win912]

Still have any of these available?

Awesome guy to deal with part is perfect...FYI...mine was still in factory cosmoline

 

[cruiseroutfit]

Awesome guy to deal with part is perfect...FYI...mine was still in factory cosmoline

He's been great!