love2fly
Flying the Mountains of the NW
Hey guys I just recently finished installing a GS-100A Controller strobe on my motor bikes brake light for extra safety.
Had a extra GS-100A Controller so decided to install it on my 2006 Tacoma's third brake light.
Was to be simple but after my install it seems as my third brake light will flash three times (as it should) but is very weak, dim- not even close to being bright.
The other thing now is the light goes off and does not stay on. Tried numerous ways to wire the controller but nothing seems to work other than what the instructions call for.
Any ideas what can be wrong, maybe one of you guys had done this GS-100A Controller install and had the same problem hopefully with a fix.
The three bulbs are 194 LED's I put in to replace the stock incandescent bulbs a year ago and work just fine and are very bright in the factory setting.
Any help welcome.
Thanks much
Had a extra GS-100A Controller so decided to install it on my 2006 Tacoma's third brake light.
Was to be simple but after my install it seems as my third brake light will flash three times (as it should) but is very weak, dim- not even close to being bright.
The other thing now is the light goes off and does not stay on. Tried numerous ways to wire the controller but nothing seems to work other than what the instructions call for.
Any ideas what can be wrong, maybe one of you guys had done this GS-100A Controller install and had the same problem hopefully with a fix.
The three bulbs are 194 LED's I put in to replace the stock incandescent bulbs a year ago and work just fine and are very bright in the factory setting.
Any help welcome.
Thanks much
