[FS] Calgary AB 80 series overhead compass, DEPO headlights and more

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

knorrena

knorrena

10 Year 15 Year 20 Year
Joined
Nov 5, 2005
Threads
116
Messages
1,273
Location
Calgary
Location
United States
I have the following for sale, shipping not included:
- Original stereo from my LX450 for sale. Worked great but the call for more power prevailed. Includes centre console woofer, head unit and amp. Asking $100 for all three pieces. (the flash did not go off and it was too cold to go back outside to get a new pic. I promise its just dusty and the face plate has no scratches)

- Pulled from a JDM 80 series with an oak interior, the overhead altimeter/compass option with the harness, sun visors, sensor, sensor housing, and overhead console. Asking $350.

- New never installed or even completely unpackaged, a pair of DEPO headlights. These are not specifically for the LX. To use them I believe the grill and lower fascia (the bit below the grill that houses the signal lights has to be changed). Asking $165.

- Some switches with pigtails. Two defrost, $15 each. Two hazards $15 each. One transfer case lock $30.

Contact me through PMs or email if you have questions and to work out actual shipping costs. I have a paypal account. Shipping will originate from my hometown of Calgary Alberta Canada.
DSC00207 (800x600).webp
DSC00200 skinny (800x598).webp
DSC00210 (800x600).webp
 
Last edited:
I alos have a set of N74 and N73E OME shocks for sale. They have about 5000kms (3000mi) on them. Asking $100.
DSC00213 (800x600).webp
 
Is the compass/altimeter 12V? Any information about the wiring? Is this the complete setup that will make those 2 things work?
thanks,
Jan
 
The lights are not specifically for an LX450, they are for a Land Cruiser. I planned on swapping out the grill on my truck, but have since changed my mind.

The altimeter and compass console are 12v. The JDM 80 series had 24v starting voltage, but everything alse is 12v (as far as I know). As for wiring the thing up, I planned on using the force. It wouldn't be too hard. There is a plug for the sunroof, one for power, and one for the sensor. The power one is the one that might not be wired on your truck and one could jumper off the sunroof power, but I dont know what the current draw is on the compass so it may need its own power.

As far as I know the compass altimieter is complete. I dont now if the NADM trucks had the moutning tabs for the sensor. Checking would involve lifting your headliner. I have not checked mine so I dont know.
 
Last edited:
Lights and shocks tentatively sold (pending reciept of funds) to SHREDwagon.
 
Shocks are sold.

New price for the lights: $150
New price for the Altimeter: $300
New price for the head unit, amd, and woofer: $65
 
potentially interested in the depos. PM sent. thanks
 
The lights are sold.

I could swear that someone asked me for more pics of the altimeter set up. I have looked everywhere for your email address and cant find it so please dont be offended that I have not replied. I will post more close up pics tomorrow morning.
 
Last edited:
I found another cdl switch in my box of switches. See thepic below. Its not quite the same as the one that everyone else uses, but it works exaclty the same. I know because I prefer this style and its the one I use.

More pics of the altimeter/compass.
DSC00235 (800x600).webp
DSC00218 (800x600).webp
DSC00219 (800x600).webp
 
If only my tax return would show up, I'd love to have the console. Great deal on those shocks and depot lights. GLWS
 
Put me in line for the depo's should anything fall thru. Only ones I can find now are PLASTIC lens and we all know how that will end up in a few years!
I
 
I can confidently say that the lights are sold. If however somesort of disaster occurs I will contact you first.

Karl
 
You must log in or register to reply here.

Share this page

Back
Top Bottom