I recently replaced upper ball joints and front shock bushings on my 03 LX. I now have a rather annoying squeaking noise coming from the drivers side. I have pulled the upper shock bushings apart and reoriented twice since initial install. The upper shock nut is probably tighter than it should be now. I cannot figure this out. It sounds like rubber rubbing on metal.
The lower ball joints probably need to be replaced as do all the control arm bushings.
Is it possible the squeak is due to stress now being applied to the lower ball joint since the upper is new. Maybe the control arm bushings? Or, is it likely the shock bushings are responsible?
The lower ball joints probably need to be replaced as do all the control arm bushings.
Is it possible the squeak is due to stress now being applied to the lower ball joint since the upper is new. Maybe the control arm bushings? Or, is it likely the shock bushings are responsible?