Ok, so longtime cruiser head here with a difficult electrical problem. Purchased a great condition 99 LX470 a few weeks ago and front door actuator wasn't locking or unlocking from switch or remote. All 4 other actuators are working fine. Read a bunch of threads on how to replace just the motor and ordered a bunch from ebay. Yesterday I pulled the old motor and replaced it on the drivers front door and when I reinstalled the everything, much to my dismay, it still didn't work. 
I started diagnosing at the motor and found that the contacts in actuator housing aren't getting power when the lock switch is activated in either direction. Now I'm at a loss for what to do as I don't have a factory wiring diagram and don't know which direction to go next.
Any help or advice would be greatly appreciated, just please don't suggest I check the fuse.
I started diagnosing at the motor and found that the contacts in actuator housing aren't getting power when the lock switch is activated in either direction. Now I'm at a loss for what to do as I don't have a factory wiring diagram and don't know which direction to go next.
Any help or advice would be greatly appreciated, just please don't suggest I check the fuse.
