Found out why my gas gauge isn’t working

[Skeet]

Tank looks like it will clean up and be good.
@beno any chance I can get new rubber from you for everything from the fuel pump to the gas cap?

 

[Skeet]

Just placed an order for the replacement rubber:

77169-14020 Gasket, Fuel Suction Tube Set: 1
77213-60030 Hose, Fuel Tank Inlet: 1
77249-60040 Hose, Fuel Emission: 1
77249-60050 Hose, Fuel Emission: 1
90445-22904 Hose, Fuel Tank Breather: 1
95333-06040 Hose, Fuel: 1
95332-10040 Hose, Fuel: 1
77250-60050 Hose, Fuel Return: 1
77260-60060 Hose, Fuel Main: 1
95333-06030 Hose, Fuel Return: 1
90430-12245 Gasket, Drain Plug: 1
77023-22040 Filter, Pickup Tube: 1 (not sure if mine had this or not. Too rusty to tell)
23300-38010 Filter, Fuel: 2 (will change these out while I purge the fuel line)

I didn't order any of the clips or clamps since mine aren't rusty and were holding well

 

[Michael Hanson]

Hi, Hesitation ??? I think so with that crud and rust ! Boil that Tank and seal it good. Mike

 

[Skeet]

Sealing it with Red-Kote. Seems to have a good track record.

 

[Skeet]

Hello, we received your order however a few items you requested have been discontinued:

77249-60040, 77249-60050, 77250-60050 and 77260-60060. If you would like to continue with the remaining parts on the order let us know.

Anyone completed this install since they've discontinued these hoses and have knowledge of what can be used instead?

 

[Skeet]

The discontinued fuel hoses are 6mm and 8mm ID. Picked up 10ft each of Gates 1/4" and 5/16" ID. This should be enough for new rubber on everything fuel related.

 

[Skeet]

Tank bolted up. Hard lines blown out. All new rubber lines, fuel filter, charcoal canister.