For Sale / Wanted To Buy (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

1989 fj-62

My FJ-62 is off the market again. I found a great body shop near my house that loves to do metal restoration, so it is presently there getting new metal in the rear rocker as well as some cosmetic stuff. No bondo at this shop! (I can drop the truck off and get home on my road bike!)

They are also going to fix the issue with the "overspill" issue common with all 62s - -they apparently have some clearcoat that will withstand gas overflow.

They did my wife's 100 recently after she hit a big bear. Its now better than when we bought it! Good guys! (They are presently doing a frame off restoration of a CJ with a new GM crate motor)

Original Look, Marshall NC (828) 649-3408
 
Last edited:
WANTED: ARB Rear Bumper for 62

I am looking for an ARB rear bumper for my 62. This is the one without the tire or j-can carrier. Its a discontinued ARB product. I have cross posted this in Mud Wanted. Here is a pic I got from the 60s section:

attachment.php




(Photo originally posted by dixie_cragger)
 
Last edited:
Hey guys i'm looking for a distributor for my fj62 model 1989, and the right front end cap for the bumper thanks!.
 
Hey Fabianchin!

I took my bumper off my 89. Eventhough it was in pristine condition, my end caps were rust magnets. (Some chemistry I don't understand makes flexiplastic or rubber "absorb" rust when it contacts metal, same deal with mud flaps)

I would suggest buying a new one from SOR as it may be worth the extra $$$.
 
eventhough said:
Schweet David - looks like you are going to be up for some serious wheelin' soon!!! :grinpimp:
Click to expand...

Could be . . . My 89 is in the body shop now getting some new metal, paint, and clear coat. I visited it yesterday and these guys are rocking! It should be ready for the November 8th meeting.


I saw the pictures from Cullowhee and it looks like some of the trails now require you to slide through on the side of your vehicle. Yikes! I am more of an "expedition" kind of guy and will go if allowed to stay on an "expedition" route. Don't mind buffable stuff. I think Adam is in this group too.
 
Turkeypen said:
Could be . . . My 89 is in the body shop now getting some new metal, paint, and clear coat. I visited it yesterday and these guys are rocking! It should be ready for the November 8th meeting.


I saw the pictures from Cullowhee and it looks like some of the trails now require you to slide through on the side of your vehicle. Yikes! I am more of an "expedition" kind of guy and will go if allowed to stay on an "expedition" route. Don't mind buffable stuff. I think Adam is in this group too.
Click to expand...

The most "damage" a 60 series saw was buffable. It was Mike's red bomber as pictured here...
DSC03115.jpg

He got some scrapes, but mostly because he wasn't locked and it was super slippery up there. I cautioned most just to stay close to the wall instead of fighting it and then slamming into it. Mike did that and came out with minor scratches.

And this was as hairy as it got for us. We went through two other spots like this, but we were able to "straddle" the ruts in those cases.
DSC03117.jpg
 
Thanks Turkeypen, ill get a new one in SOR, still if anyone is selling a good distributor fj62 1989.

My landcruiser turned off while I was on the road, no overheating, I need to wait for it to fully cold down and then it turns back on =/ weird.
 
fabianchin said:
Thanks Turkeypen, ill get a new one in SOR, still if anyone is selling a good distributor fj62 1989.

My landcruiser turned off while I was on the road, no overheating, I need to wait for it to fully cold down and then it turns back on =/ weird.
Click to expand...

Had a coil do that to me once upon a time. Was crazy to figure it out. luck :cheers:
 
Coil question

Need to get someone who has 62 experience to answer, I could drive all the way back to charleston and check mine and Davids new to us 62 but don't think I will. All past experence has been with 40,s 45,s 55,s and 60,s all had seperate coils from the disssy. So I am guessing that's true for the 62 but not sure. Guy come on somebody on here knows for sure. Doc:)
 
The ignition coil is seperate on a 62 also. I looked on sor and it looks like the coil is the same for a 60 and a 62. Here is the link.
Specter Off-Road-Land Cruiser Parts - Search On-024-03

About half way down you see this one.
024-03E

Ignition Coil -
Fits 8/80-1/90

58.54

Yes

You should be able to find one from a parted out rig cheaper and closer than that to try out at least.

Hope that helps

Dave
 
I am also looking for some tires for my truck. 33 or 34's I have a set of rock crawler 15 x 8 rims to put them on. If anyone has anything let me know. My current tires are worn out and causing some death wable at decent speeds.
 
2 SM465s

I have 2 SM465s for sale. They are both complete, and both have 10 spline outputs. One of them has a worn output shaft, the other has a broken mounting ear on the housing. You could build one good tranny out of them and have a lot of spare parts. $200 obo.
 
reminder

Just a bump here. Still got some stuff for sale.

Auburn limited slip $200

for the rest make me an offer!
2 -3sp tranny's, one top shift one column shift
3sp bell housing, flywheel,and clutch fork
curved window glass for hard top
rear hatch off '79 fj40
Drive shafts off a '70 fj40
SOR fiberglass bib and fender aprons for a '79 fj40 (new never mounted)
tlc fender emblems off a '70fj40
Headlight bezel , square style
Tire carrier off a '79 fj40
Windshield hinges
Misc door hinges
Misc small parts
u bolt plates off 79
F and R axles '72 fj40
Warn hubs, course spline
 
I have a Saris bike rack i am going to sell. This came off my wife's Subaru Outback. It has the feet on it to mount to a factory roof rack. Comes with load bars, 3 fork mount bike trays and a flairing. I am asking $250 for it. I will be putting it in iwanna at the end of the week if there is no interest in it.

Edit to add a front end off a 60. I bought this to change my 62 over to round eyes, but have not gotten around to it and have some other projects i would rather do first. I have the core support with headlight buckets and headlights, the grill and headlight doors, front valance and turn signals. It all came off a blue truck and will need a little body work to make it look good. $150 for all and i prefer not to split it up at this time. I will post up some picks of the grill and headlight doors tonight. They are in good shape if i remember correctly and are not blacked out.


Dave
 
Last edited:
1983 FJ60 radiator - will not guarantee condition - all I can say is the rest of the cooling system on the motor I bought left something to be desired.

Cost = a 4 pack of Gordons :grinpimp: - local pickup only
 
You must log in or register to reply here.

Similar threads

Gun Runner 5
Events/Trails 10th Annual Peter E. Brown Memorial 70 Series Meet & Greet To Support ALS
Replies
3
Views
620
Gun Runner 5
Gun Runner 5
highsierra4x4
New to the east coast
Replies
2
Views
689
ceby
ceby
Krondor
Looking for help with a Holley Sniper Autolite 1100
Replies
11
Views
813
Krondor
Krondor
W
Looking for OEM FJ40 wheels
Replies
0
Views
600
wildcatter 264
W

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom