For Sale / Wanted To Buy (8 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Jason-

Is the aerator tow behind or is it a motorized walk behind?
 
Turkeypen said:
Jason-

Is the aerator tow behind or is it a motorized walk behind?
Click to expand...

It is a tow behind. Has 56 tines (hollow plug style) and I believe 4 replacement tines as well (like $50 ea.) A small homeowner mower/tractor will pull it fine. PICS IN ORIGINAL POST ( previous page )
 
Last edited:
Anyone have a set of 16" wheels that would fit a 100 laying around? I have been neglecting Sid (the 100) for too long and it's time to do a little more work on the poor fella. Also looking for bumpers.
 
I figured I would offer these here first.

Doors off of a 73 I think. That vent window thing was replaced with plexiglass or some kind of plastic. The top corner of the driver door is very slightly bent out. A couple taps with a hammer will fix it. Some small rust between the weather strip and door at the bottom. Weater strip need replacing. The paint on the outside looks like it was sanded and maybe painted and then faded. Im not sure. $150 They are in Starr, or I can meet you somewhere around Anderson. Or would trade for 4340 Chromo 30 spline Land Cruiser Longfield inners.

Doors1.JPG


Doors2.JPG


Doors3.JPG
 
Last edited:
hey y'all,

i'm headin into greenville/easley this weekend for an engagement party.

anybody need 40 parts? shoot me an email or PM if you have any requests...i'm basically just tryin to pay for gas to drive down there and back, ha ha.

i've got an inner/outer rocker panel replacement set from CCOT that has a coat of surface rust...never installed. sell for over 200 from them, $75 from me this weekend and i'll get real close to deliverin em, ha ha.


malphrus
 
Ok folks, so multiple back surgeries are forcing my folks to relocate to a townhome so lots of stuff is going. thought id post some of the better stuff here. Lots of homeowner supplies. And there is no way to begin even describing how my father keeps his stuff. Lets just say most folks dont keep their lawn tools garaged, and those that do, probably dont mop their garage floor. Immaculate doesnt even do the Harley justice. The lazy boys were probably sat in half dozen times in the showroom but do not work for post surgery.

Please PM me to make sure i see your response. Thanks guys. Items in Oak Ridge NC ( I-40 and I-85 )

Items “ For Sale”

John Deere 18 hp tractor model GT235 48” cutting deck $1800 (new $4500)

Troy-Bilt vaccum / mulcher $250 (new $500)

O’Brian slalom water ski’s (2) with cases $150 each or $275 for both

Receiver type trailer hitches for Dacota p/u, Jeep Cherokee $50 each

Dunwel Motorcycle lift $225 new (cost $350)

Hoist 1100 weight machine $1500 (new $3300)

Two complete sets of scuba gear extra suits and high pressure tanks Priced individually

Gun Case for 6 guns Pecan finish $250

Two Lazy Boy recliners brown Nubuck Leather $600 each (cost $1000 ea) new

Jasper Knee hole desk, pecan finish ($250)

Four ladder back chairs dark oak finish ($175)

’97 Harley Davidson Wide Glide immaculate condition 17k miles $13,000 ($22,000 cost)
 
Last edited:
I'm new to this site. I need a hardtop and doors for my 72 Fj40 quick it's in the shop about to be painted and I need those parts could you help me out I'm even willing to pay a finders fee.
Thanks Chad 469-348-3242
 
I need a hardtop and doors 72 Fj

I need a hard top and frnt doors for my 72 Fj it's in the paint and body shop now and I need those parts quick in decent shape I'm willing to pay a finders fee I'm new to this site and not sure how to navigate it that well or other sites to find what I need. I'm in Dallas Tx. willing to drive or ship Please help Chad 469-348-3242
 
jfz80 said:
Ok folks, so multiple back surgeries are forcing my folks to relocate to a townhome so lots of stuff is going. thought id post some of the better stuff here. Lots of homeowner supplies. And there is no way to begin even describing how my father keeps his stuff. Lets just say most folks dont keep their lawn tools garaged, and those that do, probably dont mop their garage floor. Immaculate doesnt even do the Harley justice. The lazy boys were probably sat in half dozen times in the showroom but do not work for post surgery.

Please PM me to make sure i see your response. Thanks guys. Items in Oak Ridge NC ( I-40 and I-85).
Click to expand...

Can you give an update on status of this stuff? What's still available? There is a bunch of stuff on here that we may be interested in.
 
Last edited:
  • I have 4 Firestone Destination AT 305/70-16 80% tread $400.00 2 sets Alpine Supersport diamond pattern chains for 285/70-16 or 305/70-16 like new in case. $60.00 pair. Front and Rear stock bumpers for uzj100. Grey with fog lights. Rear stock springs and front torsion bars for 100 and running boards. I'm open to any offers on the 100 parts. Thx Tim 828-712-7829​
 
k9crazy said:
Can you give an update on status of this stuff? What's still available? There is a bunch of stuff on here that we may be interested in.
Click to expand...

i believe it is all still available w/ the exception of the ab cruncher, the incline situp bench, and both ladders. Feel free to make an offer, especially on multiple items. And if you buy enough maybe i can come down and pickup bucketheads 55 :hhmm:.

cmon HEATHER , you know youd look good on the HOG !!! a garage full of swine!!!

i have pics of most things and can get any particulars
 
jfz80 said:
i believe it is all still available w/ the exception of the ab cruncher, the incline situp bench, and both ladders. Feel free to make an offer, especially on multiple items. And if you buy enough maybe i can come down and pickup bucketheads 55 :hhmm:.

cmon HEATHER , you know youd look good on the HOG !!! a garage full of swine!!!

i have pics of most things and can get any particulars
Click to expand...

Is Jarod threatening to sell that thing again? Everyone needs more piggy...OINK! Note I say piggy...not HOG. Can you see me on a Harley. WHATEVER!

Actually, my Dad has always wanted a Harley. I don't know what model, but that's one of the things I was going to pass along. Lemme see what the Dad and the hubby-type person say for some of the yard stuff and what not.
 
This bike is super nice and not stock. Screaming eagle cam and injectors, exhaust and lots more extras!! It will make someone very happy, and i just replaced and repacked the wheel bearings and headset last fall. The model lands right in the middle its no sporster, but its no road king. Performance and size.

OK so becketheads 55 is gone :(, now you gotta pay delivery ;)
 
Yeah, I have nothing back from my Dad yet, so don't hold your breath on us for anything on the list. I would love to have a lawntractor and all the gadgets cause ours sucks, but I can't pry the money from Taylor's hands. He says he'd rather walk behind the push mower to get exercise. Freaking weirdo. Who doesn't want to mow the lawn on a John Deer with a cup holder and beer? UnAmerican I tell ya.

Sorry to hear about buckethead's 55. A bit off topic, but do you know who bought it?
 
You must log in or register to reply here.

Similar threads

Gun Runner 5
Events/Trails 10th Annual Peter E. Brown Memorial 70 Series Meet & Greet To Support ALS
Replies
3
Views
620
Gun Runner 5
Gun Runner 5
highsierra4x4
New to the east coast
Replies
2
Views
689
ceby
ceby
Krondor
Looking for help with a Holley Sniper Autolite 1100
Replies
11
Views
813
Krondor
Krondor
W
Looking for OEM FJ40 wheels
Replies
0
Views
600
wildcatter 264
W

Users who are viewing this thread

Total: 9 (members: 0, guests: 9)

Share this page

Back
Top Bottom