Fjz80 my 1/2 rear storage box

[GILBERTO PEREZ]

I just finish my rear storage box
my fabrication was low budget, & it works ''UNDER $40.00 ''
I got some 1/2 inch. plywood & some 7/16 osb Sheathing from the precut bind ( scrap ) mark down (pink) $1.75 each I got two 1/2inch stander plywood, four 48X24, & 7/16 inch osb 43x24, & 8X1X2, wood
10x43 wood glue, grip-rite screws, crown bolts from nut & bolt surplus
box is 21X42X10 the rear cover is 21X30 & the fron cover 21X10
for the box I use, 7/16 inch osb 2per SIDE wall & 1x2 wood frame & for the box cover I use the 1/2 inch plywood

 

[GILBERTO PEREZ]

More pictures

 

[77cruiser77]

I like it.

I'd do something like this for myself but as much as the hzj77 is a well thought vehicle it does not have rear split seats