FJZ80-How to test your ABS System Breaks Working? (1 Viewer)

[kfarea]

MY FJZ80-95LC is equipped with ABS system breaks. when i push hard my breaks at 100 km/hr on normal conditions driving road, the car slide 15 meters with slightly not in stright path feeling so and by looking at tyres trails printed on the road. I machined all rotors and replaced with oem disk pads, checked cylindrs where perfectly operating. the mechanic did these repaires. suggest I check my ABS system. The ABS light cames on before starting and goes off when ignitionon. Left me absolutely wondering where is problem.

 

[Fochdog]

A simple test for you ABS is to find a gravel road, go about 45 mph (check no one is behind you ) and mash the pedal on the left. You wheels should not lock ... only slide ... unless you meant some sort of diagnotic check?

 

[KliersLC]

On the above mentioned test you should also feel the pedal pulsing
Dan

 

[IdahoDoug]

Tell me about your tires. All four with the same wear (meaning YOU bought them and they've been properly rotated)? Stock size?

DougM

 

[kfarea]

This is serious . I am suggesting all to try and reply thier findings!

I forgot to mention all tyres are brand new 275/16 size dunlop . My interest is to know 1- if sliding should be in stright path 2- If the ABS pulses on the foot is only felt on the begining when pushing hard the breaks or all along the path til the car stops.
It might make sense that the car would end stop to only one direction right or left to minimize the collision.