Parting Out FJ62 Parts from three 3FE engines. DFW (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Last edited:
Box of smog stuff. 2 EGR $40 each, 2 smog pumps. One makes a grinding noise, $20, the other is good $40.

Fan Blade: $25

Exhaust Manifold: $60

Intake Plenum with throttle body: $125

AC Compressor: 2 $60 each

Stock Alternator: $20

Mean Green Alternator $260 (PO of the alternator suggested only a few k miles use on it. I had it tested at Oreilly and it was good.)
http://shop.mean-green.com/1992-88-LANDCRUISER-40L-MG14401.htm

All prices include ground shipping.
 
20150117_172810.jpg

Fuel rails, $40 each

Air switch and charcoal canister $20 each


20150117_172202.jpg

Intake plenum without TB. $60

20150117_172120.jpg


Valve covers. Decent shape. Need cleaning and paint. $40 each

20150117_172132.jpg


Water pump. Good and tight. $30

20150117_172744.jpg

Intake manifold $60 each.

20150117_172727.jpg


Flex plate good shape. $20

Prices include ground shipping.
 
Help me make room in my garage guys (and, honestly, help fund my vortec conversion!)!!

I managed to wrangle the V8 out of the donor truck over the weekend and after performing a multitude of tests (both in the truck and on the stand) I'm all systems go.

15%2B-%2B1
 
Do you have a good accelerator cable-pedal to throttle body?
 
Have any good power steering lines? To 94538. Thanks!
Luka
 
Guys. I'm probably going to call off this project and sell the rig and all parts together.

Just got a promotion at which will take more of my already precious time. I have my eyes set on a 100series. Will post the truck tomorrow probably.
 
congrats!
 
Hi do you have trans cooler lines that come from the radiator to the hard lines? i need them both please!
how much and sent too 90232
 
Looking for a 3fe fan clutch shipped to 93546.
 
I bought an 88 Fj62 a couple of years ago with seized engine (head gasket blew) and bought a couple of used 3FE engines to rebuild. Well, long story short, I had finished rebuilding and installing one good engine this spring and backed it out of the garage so that I could run it without getting CO poisoning. The following week, I flew to the UK and Scotland for a week. I didn't put antifreeze in the cooling system, only water. Well, thanks to crazy North Texas weather and not thinking it'd get below freezing again (much less the 7* that it got!).... I left it outside and needless to say, I fkd myself over with overlooking the weather at home while I was packing for rain and snow it the Scottish highlands.... Came home from a wonderful holiday to find a freeze plug and water under the truck.

I guess there is a silver lining.... my in laws are giving me an uncle's truck with a Vortec 350 engine. A conversion I had been planning to do in a few years anyway. I'll be picking up the Chevy donor truck over Thanksgiving to begin working on the conversion. I'd like to start getting the un-needed Toyota parts out of the garage.

I've got ALMOST all of the parts from THREE! 3FE engines. If you need anything or all of it, let me know. Will post some photos tonight. Reasonable offers accepted, but I won't entertain lowballers.
Email works best for me. Reply here or email works best ScottBrownAdventurer at gmail dot com

1- Complete engine. This is the frozen one, still in truck, not certain where but water is getting into the crank case. It starts and runs but has a high idle that I haven't bothered to diagnose. All components were cleaned and painted before re-assembly. $400 for everything.
1- 3FE block. Good block, needs new cam gear. No head. $100- Or, free if you buy the complete engine.
1- Mean Green High Output Alternator $300 (includes proper wiring harness)
2- Wiring harness $50 each
EFI parts- Make offer with what you need.
EGR parts- Make offer with what you need.

$1000 to clear out my garage of Toyota parts. Can help deliver in DFW.


The project has been stagnant for some time, but here some some pics of things during the course of the project.

76239_10100174099750121_1766638510_n.jpg


1604940_10100179267424061_1920909565_n.jpg


1012245_10100171422754841_1986647766_n.jpg


1240078_994621294411_857320397_n.jpg


1510941_10100156658901721_995990604_n.jpg


1512721_10100161429421561_2074874168_n.jpg


The H42 won't be going with the engine, but the bellhousing and brand new clutch components can be had for $200.
I need the fuel injection system with injectors all system how much to ship 10034 thanks my email ivan02053213@yahoo.com o tex me 201-310-2139 thanks
 
I bought an 88 Fj62 a couple of years ago with seized engine (head gasket blew) and bought a couple of used 3FE engines to rebuild. Well, long story short, I had finished rebuilding and installing one good engine this spring and backed it out of the garage so that I could run it without getting CO poisoning. The following week, I flew to the UK and Scotland for a week. I didn't put antifreeze in the cooling system, only water. Well, thanks to crazy North Texas weather and not thinking it'd get below freezing again (much less the 7* that it got!).... I left it outside and needless to say, I fkd myself over with overlooking the weather at home while I was packing for rain and snow it the Scottish highlands.... Came home from a wonderful holiday to find a freeze plug and water under the truck.

I guess there is a silver lining.... my in laws are giving me an uncle's truck with a Vortec 350 engine. A conversion I had been planning to do in a few years anyway. I'll be picking up the Chevy donor truck over Thanksgiving to begin working on the conversion. I'd like to start getting the un-needed Toyota parts out of the garage.

I've got ALMOST all of the parts from THREE! 3FE engines. If you need anything or all of it, let me know. Will post some photos tonight. Reasonable offers accepted, but I won't entertain lowballers.
Email works best for me. Reply here or email works best ScottBrownAdventurer at gmail dot com

1- Complete engine. This is the frozen one, still in truck, not certain where but water is getting into the crank case. It starts and runs but has a high idle that I haven't bothered to diagnose. All components were cleaned and painted before re-assembly. $400 for everything.
1- 3FE block. Good block, needs new cam gear. No head. $100- Or, free if you buy the complete engine.
1- Mean Green High Output Alternator $300 (includes proper wiring harness)
2- Wiring harness $50 each
EFI parts- Make offer with what you need.
EGR parts- Make offer with what you need.

$1000 to clear out my garage of Toyota parts. Can help deliver in DFW.


The project has been stagnant for some time, but here some some pics of things during the course of the project.

76239_10100174099750121_1766638510_n.jpg


1604940_10100179267424061_1920909565_n.jpg


1012245_10100171422754841_1986647766_n.jpg


1240078_994621294411_857320397_n.jpg


1510941_10100156658901721_995990604_n.jpg


1512721_10100161429421561_2074874168_n.jpg


The H42 won't be going with the engine, but the bellhousing and brand new clutch components can be had for $200.
Fuel injection with injectors whole system thanks email ivan02053213@yahoo.com or 201-310-2139 thanks text or call price ?
 

Users who are viewing this thread

Back
Top Bottom