Parting Out FJ62 Parts from three 3FE engines. DFW (1 Viewer)

Joined
Apr 1, 2007
Messages
541
Location
Denton, TX
I bought an 88 Fj62 a couple of years ago with seized engine (head gasket blew) and bought a couple of used 3FE engines to rebuild. Well, long story short, I had finished rebuilding and installing one good engine this spring and backed it out of the garage so that I could run it without getting CO poisoning. The following week, I flew to the UK and Scotland for a week. I didn't put antifreeze in the cooling system, only water. Well, thanks to crazy North Texas weather and not thinking it'd get below freezing again (much less the 7* that it got!).... I left it outside and needless to say, I fkd myself over with overlooking the weather at home while I was packing for rain and snow it the Scottish highlands.... Came home from a wonderful holiday to find a freeze plug and water under the truck.

I guess there is a silver lining.... my in laws are giving me an uncle's truck with a Vortec 350 engine. A conversion I had been planning to do in a few years anyway. I'll be picking up the Chevy donor truck over Thanksgiving to begin working on the conversion. I'd like to start getting the un-needed Toyota parts out of the garage.

I've got ALMOST all of the parts from THREE! 3FE engines. If you need anything or all of it, let me know. Will post some photos tonight. Reasonable offers accepted, but I won't entertain lowballers.
Email works best for me. Reply here or email works best ScottBrownAdventurer at gmail dot com

1- Complete engine. This is the frozen one, still in truck, not certain where but water is getting into the crank case. It starts and runs but has a high idle that I haven't bothered to diagnose. All components were cleaned and painted before re-assembly. $400 for everything.
1- 3FE block. Good block, needs new cam gear. No head. $100- Or, free if you buy the complete engine.
1- Mean Green High Output Alternator $300 (includes proper wiring harness)
2- Wiring harness $50 each
EFI parts- Make offer with what you need.
EGR parts- Make offer with what you need.

$1000 to clear out my garage of Toyota parts. Can help deliver in DFW.


The project has been stagnant for some time, but here some some pics of things during the course of the project.

76239_10100174099750121_1766638510_n.jpg


1604940_10100179267424061_1920909565_n.jpg


1012245_10100171422754841_1986647766_n.jpg


1240078_994621294411_857320397_n.jpg


1510941_10100156658901721_995990604_n.jpg


1512721_10100161429421561_2074874168_n.jpg


The H42 won't be going with the engine, but the bellhousing and brand new clutch components can be had for $200.
 
Joined
Apr 1, 2007
Messages
541
Location
Denton, TX
third pic is awesome! my kids are allergic to tools...
I know no reason for girls not to be awesome! It is my job to raise them that way.

I have two daughters, I always allow them to help me work on projects, regardless of trade.... Not like they can hurt much. Well... sometimes they do...
419154_940121023391_761779254_n.jpg


And they definitely help make time pass more quickly when they pull stunts like this.

10671321_10100333163410271_7531707773505432888_n.jpg


Respect, not fear.
1507587_10100178358086381_187492907_n.jpg



1723004_10100177793657501_1838918786_n.jpg


1381225_10100119294081121_368145861_n.jpg


Teach, not shelter.
575203_10100107429951931_410719221_n.jpg


Explore, don't squander.
1231091_995107320411_451240535_n.jpg


998279_989443311131_1331687574_n.jpg


622676_986696475811_1800770985_o.jpg


And by all means, protect what is good. Don't think of messin' with my girls.
1001391_968519851911_1139282745_n.jpg
 
Joined
Apr 1, 2007
Messages
541
Location
Denton, TX
Joined
Feb 21, 2011
Messages
183
Location
Northern Louisiana
Need to upper end....wire from above the 02 sensor back toward the engine. back to some ECU on top of the engine. Forgive me for not knowing exactally what its call. PO fried the wires some how and they area all burn. shorted and shreded. Hopefully if will stop the check engine light. Don't need the O2 sensor, just the stuff up stream from the yellow harness.

Thanks,


Todd H.
 
Joined
Apr 1, 2007
Messages
541
Location
Denton, TX
Hi, is the mean green alt new ! How about starter ? Exhaust downs with o2 sensors ?
Thanks, Rick

It is not brand new, but tested good at Oreilly. Came on one of the engines I purchased, it is still shiny. I have at least one spare starter. One is an aftermarket and tested good. Do you need the exhaust manifolds or the pipes after that?
 
Joined
Apr 1, 2007
Messages
541
Location
Denton, TX
Need to upper end....wire from above the 02 sensor back toward the engine. back to some ECU on top of the engine. Forgive me for not knowing exactally what its call. PO fried the wires some how and they area all burn. shorted and shreded. Hopefully if will stop the check engine light. Don't need the O2 sensor, just the stuff up stream from the yellow harness.

Thanks,


Todd H.

Todd, take a pic of what you need. Where in Northern Louisiana are you? My family lives in Alexandria and we'll be passing through Shreveport around Christmas. Was just there for Thanksgiving too... which should excuse my lack of response here.

Thanks.
 
Joined
Apr 1, 2007
Messages
541
Location
Denton, TX
Not selling trans or transfer case.


$50, $50, $25



$50, $30 if I have one still, will look and send you a pic

Prices include shipping

Thanks guys

If these prices are too high, make an offer. I usually do a search on Mud to get an idea of what these things are going for on the market. I'm trying to clear room in the garage as much as I am trying to fund the vortec conversion in the cruiser....

I got the donor truck from my in-laws last week too... So would really like to start clearing this stuff out.
10833862_10100376825980131_1008010617_n.jpg
 
Last edited:
Joined
Aug 16, 2014
Messages
51
I'd be interested in a package to help take it off your hands. Considering a rebuild for my 91 fj80. Looking for a spare to rebuild before mine craps out. Please Pm me about what you have left.
 

Users who are viewing this thread

Top Bottom