Wanted FJ60 Manual (31 Viewers)

[zornff]

'78 Jump Seat Supports

i GUESS THE PO OF MY 40 SHOPPED ON EBAY AND BOUGHT THE WRONG YEAR JUMP SEATS. i NEED THE SUPPORTS THAT FOLD UP W/SPRINGS, THANKS IN ADVANCE. MIKE

 

[zebrabeefj40]

Warren,

I might have what you need for the nozzle. If not I'm sure we can figure something out with some common hardware items...

Nick

 

[65swb45]

I've got a rust free passenger side lower half you can have for $25 bucks plus the ride. Call me at the shop to follow up.

 

[cruiseroutfit]

How about the replacement plasting apron emblems, they stick-on and look rather original... They are alot cheaper at a freindly Cruiser source

 

[cruiseroutfit]

Thanks Mikesta

Kurt,

Its push in, no threads in the cover. I'll PM you

Brian

Let me know

 

[bluemax]

just need the defrost hoes
thanx to everyone who helped to keep a brother warm this winter
g..

 

[Uncle Ben]

The smallish outside part of the front of the tcase? I haven't looked in a while but isn't the vacuum section part of the front half of the case?

Nope. It's similer to the older three speed tranny T-case, but not the same.

 

[zetasig]

Stick ons might take away from my spray can paint job. Kind of like iron on patches for sweat pants.

Who else. Come awn.

 

[wesintl]

swap meet is at slee later in the month if you don't find any by then.

BTW we missed you yesterday on the trail

 

[zebrabeefj40]

Stick ons might take away from my spray can paint job. Kind of like iron on patches for sweat pants.

Who else. Come awn.

Then you need to call you friendly Toyota dealer and order up some BRAND SPANKIN' NEW emblems to go with that blingin' paint job! They would double, no, TRIPLE the value of your truck!

I have newer emblems from mid-70's Cruisers but none of the older stuff...sold'm already.

Nick

 

[zornff]

Like the title says, FJ-40, old style or new I’m not too picky, let me know what you folks have. Nothing too spendy, Thinking around $100-150 I shipping may be a PITA.

If you have some in good shape maybe I could use them as full doors and cut up the ones I have.

Thax

Zach

I have a set that i bought from a guy here on mud. I had him cut the upper frame off and remove guts and glass to save on shipping. Older style, and a bit of rust @ the bottom. I can send pics if your interested. $60.00 for the pair.

 

[zetasig]

Well you not too far off. Body and frame was 100 bucks, paint was 45ish. New OEM emblems are what 40 a piece.

 

[Klunky Chris]

if no-one has these hoses for you go to a vaccum store and buy a 2 1/2" hose. this pops right into the heater box and goes over the defrost ducts nicely. use hose clamps to hold it on. (it fits snug at first, but after a bit of *defrosting* it heats up, loosens, and falls off )
I bought mine for like $12

heater defrost hose ideas?

although the pics aren't working cause my server is temporarily disconnected....

 

[cruiserhead]

I`ve got a set of used ones off a `71.$25.00 for the pair to your door.I know you want pics.I`ll try to get to that tonite for you,as long as your interested.

 

[Magoo]

where you located?
and just throw me an offer and its yours.
shawn

 

[armando]

need hard doors for fj25

I don't know if the fj25's were made with hard doors.
I have a 1960 fj25 and want to put some hard doors on it

does any body know where i can find a pair , or if somebody makes custom doors??

Thank's
Armando

 

[cbmontgo]

WTB 31s/32s/33s for stock FJ60 in Dallas area

Looking for a used set of tires for my 60; I am hoping to find a lightly used set of BFG KOs or something along those lines (ideally). Please shoot an email to cbmontgo@yahoo.com if you've got any.

Thanks.

 

[anton]

Smog Pump for 84 FJ60

anyone?

 

[zetasig]

Yeah interested, Price is right, This is going to be a thousand dollar rig before I know it. I dont have a secure connection right now. As long as all the posts are there and the nuts to mount them consider them sold.

I will get you my info asap. Thanks Warren.

 

[toyman317]

Need 1984 FJ60 Driver's Seat - Beige

I need a driver's seat with head rest for my 60. I have the tan/beige interior. I am hoping to find one with at least excellent fabric condition. It is OK if the vinyl is cracked, etc. as that is much easier to get fixed than finding new fabric. I live in Indy. Thanks.