Wanted FJ60 Manual (67 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Texican
s-Moderator
I had Justin my local wrecking yard guru run this in his interchange computer and it says the door is the same from 81-90 all 4 door Land Cruisers..........
I don't know just relaying info....
Butch
I don't know just relaying info....
Butch
Wanted--2F engine with good compression
I am looking for a good 2F engine with good compression numbers.I prefer an 83 or newer engine.
Let me know what you have with your location and price.
Thanks
I am looking for a good 2F engine with good compression numbers.I prefer an 83 or newer engine.
Let me know what you have with your location and price.
Thanks
Air Rail for 75 FJ40
Does anyone out there have a descent smog air manifold for a 75 FJ40 for sale?
It is part #20 on SOR.coms web site.
http://www.sor.com/sor/cat048b.tam?xax=3814
See attached photo.
Thank you,
Vern
Does anyone out there have a descent smog air manifold for a 75 FJ40 for sale?
It is part #20 on SOR.coms web site.
http://www.sor.com/sor/cat048b.tam?xax=3814
See attached photo.
Thank you,
Vern
Last edited:
smcruisin,
got your pm, i'll have a look, but "think" that i have what you are looking for.
best off to call me, busy as fawk with my own junk at the moment, and not much time for web wheel'n and talk'n s*** here on mud.
i'll email you the critical stuff....
crusty
got your pm, i'll have a look, but "think" that i have what you are looking for.
best off to call me, busy as fawk with my own junk at the moment, and not much time for web wheel'n and talk'n s*** here on mud.
i'll email you the critical stuff....
crusty
milesbj60, you got PM
wtb: 55 springs
sup fellas...
lookin for some 55 springs...in sc, ga, nc, va, etc. if possible.
malphrus
jmalphr@clemson.edu
sup fellas...
lookin for some 55 springs...in sc, ga, nc, va, etc. if possible.
malphrus
jmalphr@clemson.edu
Malph, You should be to busy working on your cruiser to even get on here. As for springs if 89 gets back to me soon and I buy the pig we might be able to work something out.
....well, i'm still up in fort mill right now, and the 40 is in clemson.
i think i'll be up here for another couple of weeks, the pay is too good at this job to not work, ha ha
yeah, let me know if i could get some springs off that pig....i think i'm goin to go with the 55 springs front and rear now, instead of just rear. i figure why not...
malphrus
(let me know when the deal for the parts pig is goin down, and i'll help you out however i can...trailer, etc.)
i think i'll be up here for another couple of weeks, the pay is too good at this job to not work, ha ha
yeah, let me know if i could get some springs off that pig....i think i'm goin to go with the 55 springs front and rear now, instead of just rear. i figure why not...
malphrus
(let me know when the deal for the parts pig is goin down, and i'll help you out however i can...trailer, etc.)
Kurt, you just looking for the motor?? or the whole tranny/transfer package? I've got the 91, and not sure what I'm doing with it. about 8hrs north of you. also gotta check my 2F valve cover for you. Paul
cruiserbrett
GOLD Star
SW20FJ40 said:
96 not = 3FE.
mike
82bj42 1st project
I have one from a 78fj40 with 20,000 original miles on it. I'm located in Toronto,Canada. Pm me if your interested in it. Thx
wtb- fj52 parts 15x8 rims, rear hd. heat lines, and var.
1. I am about to put my Alcan 4" springs on the cruiser and need some 15x8 rims (need the offset to be correct as I dont want to grind anything.) to fit my 33's so i am not riding around on the 31's with the huge lift
2. Doetsch Tech 8000 series shocks for the same app dont know length comp, have been told to measure after I put the lift on.
3. Rear hard heater lines for a fj62. Mine are rusted so I had to bypass the rear heater, not a big issue I just want it done right.
4. Various other items that are going to be needed in due time:
A new front end rebuild kit.
Jacobs ingition kit
Custom sliders
Custon/ARB front bumper
Custom rear bumper/tire carrier
Roof rack
A CURE FOR RUST THATS CHEAP AND EASY!
I dont have a lit for trade just a set of stock ford rims that I got in a deal with a set of tires. I have pics of them if anyones interested thay are the ones that have the chrome trim ring.
I also will have my 31's for sale if anyone is interested, they are great for trail tires and not too too bad, i drive them about 30+ miles a day with no issues.
1. I am about to put my Alcan 4" springs on the cruiser and need some 15x8 rims (need the offset to be correct as I dont want to grind anything.) to fit my 33's so i am not riding around on the 31's with the huge lift
2. Doetsch Tech 8000 series shocks for the same app dont know length comp, have been told to measure after I put the lift on.
3. Rear hard heater lines for a fj62. Mine are rusted so I had to bypass the rear heater, not a big issue I just want it done right.
4. Various other items that are going to be needed in due time:
A new front end rebuild kit.
Jacobs ingition kit
Custom sliders
Custon/ARB front bumper
Custom rear bumper/tire carrier
Roof rack
A CURE FOR RUST THATS CHEAP AND EASY!
I dont have a lit for trade just a set of stock ford rims that I got in a deal with a set of tires. I have pics of them if anyones interested thay are the ones that have the chrome trim ring.
I also will have my 31's for sale if anyone is interested, they are great for trail tires and not too too bad, i drive them about 30+ miles a day with no issues.
Found one, thanks.
I have a grey one with no interior panell or switches. Rust free.
http://www.jkcustoms.com/sale.htm
Email me from the pageIf you want it. I'll take $200 Plus shipping..
jk
http://www.jkcustoms.com/sale.htm
Email me from the pageIf you want it. I'll take $200 Plus shipping..
jk
Drunk Monkey said:
Bout time you showed up on here Jason
Check out www.sleeoffroad.com for ARB stuff and FJ62 sliders. Tech links page has a great shock spreadsheet to get the right ones after you get your measurements.
