birfield needed
Fine Spline.
Fine Spline.
Wanted FJ60 Manual (13 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I need to replace the cigarette lighter in my '40
FWIW, mine didn't work for years, I took it out, it was exactly like the aftermarket ones with a round pin on the back for the hot lead. You can probably find one that'll work and look good at your local parts store.
I put it back in and CONNECTED the hot lead and it worked! Guess I had yanked the wire off sometime over the years.
FWIW, mine didn't work for years, I took it out, it was exactly like the aftermarket ones with a round pin on the back for the hot lead. You can probably find one that'll work and look good at your local parts store.
I put it back in and CONNECTED the hot lead and it worked! Guess I had yanked the wire off sometime over the years.
I need a good winch for a '40
Keep your eyes and ears open for a good used one. I snagged a WARN 8274 several years ago for $200. It needed to be rebuilt, and a new cable (went with rope) but all the parts are available from WARN. The guy was more interested in getting the crap cleared out from his house than he was in squeezing every last dollar out of me.
Keep your eyes and ears open for a good used one. I snagged a WARN 8274 several years ago for $200. It needed to be rebuilt, and a new cable (went with rope) but all the parts are available from WARN. The guy was more interested in getting the crap cleared out from his house than he was in squeezing every last dollar out of me.
looking for 1991-1997 Land Cruiser body
Try cruiserparts.net, i know they did have one for sale
Try cruiserparts.net, i know they did have one for sale
Need Vaccum Solenoids for fj62
Again, my vac solenoids are out on my fj62 and the only way I can engage 4 wheel drive is to switch the hoses around. If anyone has this piece they can sell me let me know. Thanks Matt mevans8@utk.edu Trying to avoid paying dealer cost and even the cost that cruiser parts.net is offering for the part. :-\
Again, my vac solenoids are out on my fj62 and the only way I can engage 4 wheel drive is to switch the hoses around. If anyone has this piece they can sell me let me know. Thanks Matt mevans8@utk.edu Trying to avoid paying dealer cost and even the cost that cruiser parts.net is offering for the part. :-\
Need Vaccum Solenoids for fj62
Check this out.......
http://69.61.14.149/forum/index.php?board=1;action=display;threadid=5446
Check this out.......
http://69.61.14.149/forum/index.php?board=1;action=display;threadid=5446
1Fine40
Rust Buster
birfield needed
Just got mine from Travis Rankin, the Smurfield guy. It went in real easy, and I'm happy so far. Paid $115 shipped to my door without a core. I'll probably do the other side soon. HTH. 
Just got mine from Travis Rankin, the Smurfield guy. It went in real easy, and I'm happy so far. Paid $115 shipped to my door without a core. I'll probably do the other side soon. HTH.
1Fine40
Rust Buster
Need an EZ-Locker...
Why go used when a new aussie is 2 bills?? Brand affinity? Just curious.
Why go used when a new aussie is 2 bills?? Brand affinity? Just curious.axle: mini truck or 40 (with disks)
Have a set of disk brakes up in ebay for a 40 right now and have a set of mini truck disk brakes that will be going up for sale soon also. Both need rebuilds.
here is the item number for the 78 FJ40 Disk brakes 2434066493
let me know if you still need something.
Stew
Have a set of disk brakes up in ebay for a 40 right now and have a set of mini truck disk brakes that will be going up for sale soon also. Both need rebuilds.
here is the item number for the 78 FJ40 Disk brakes 2434066493
let me know if you still need something.
Stew
Need an EZ-Locker...
Well, since they have extended the intro price of $199, I may do just that. I was hoping for as good-a-deal as I got on my current EZ-Locker to save money but now that I have more time... We'll see.
Jody.
Well, since they have extended the intro price of $199, I may do just that. I was hoping for as good-a-deal as I got on my current EZ-Locker
to save money but now that I have more time... We'll see.Jody.
- Joined
- Oct 1, 2002
- Threads
- 55
- Messages
- 259
- Location
- Peachland, BC, Canada
- Website
- members.sounddomain.com
I need a good winch for a '40
Not sure if it's the same down there but....
Up here in the Great White North, when say the forestry trucks get traded in for a new fleet every once in a while, they strip all the old winches off the trucks. They were selling some 8274's that didn't look abused at all.
So might want to check some of the dealerships? This particular bunch was at a Ford dealer.
HTH
Not sure if it's the same down there but....
Up here in the Great White North, when say the forestry trucks get traded in for a new fleet every once in a while, they strip all the old winches off the trucks. They were selling some 8274's that didn't look abused at all.
So might want to check some of the dealerships? This particular bunch was at a Ford dealer.
HTH
79 and Newer Tub
Bump.
Bump.
Chevy 350 short block
I'm looking for a 350 block and crank to rebuild for my T-100 project. I'll travel from the Chicago area to find one.
Thanks
I'm looking for a 350 block and crank to rebuild for my T-100 project. I'll travel from the Chicago area to find one.
Thanks
Re:I need a good winch for a '40
i have a ramsey pto, i believe it was installed by the dealership when truck was new. that's what the previous owner told me. $450. shipping from 52404.
i have a ramsey pto, i believe it was installed by the dealership when truck was new. that's what the previous owner told me. $450. shipping from 52404.
manual shift fork and shifting linkage
i'm looking for the manual shift fork that mounts on the nose cone of the t-case, it only came on the 72's and 73's FJ40's, and the linkages off the 4-sp t-cases IIRC. this is what i'm told i need to complete my automatic conversion.
i'm looking for the manual shift fork that mounts on the nose cone of the t-case, it only came on the 72's and 73's FJ40's, and the linkages off the 4-sp t-cases IIRC. this is what i'm told i need to complete my automatic conversion.
cruiser_guy
Out of Africa / North Africa
manual shift fork and shifting linkage
Do you have any transfer case parts right now? The shift fork rod which mounts on the transfer front extension is shorter on the older models but the actual fork itself is the same and is interchangeable. Do you need the shorter rod or the whole fork, rod, and housing assembly? I have everything but the actual fork itself for the three speed (older pre '74/75 transfer case). I also have the three speed linkage which mounts to this housing as well if you need it.
The three speed front extension and four speed linkages will NOT MATE when mounted on a four speed transmission (I know 'cause I tried).
If interested send me a PM
Do you have any transfer case parts right now? The shift fork rod which mounts on the transfer front extension is shorter on the older models but the actual fork itself is the same and is interchangeable. Do you need the shorter rod or the whole fork, rod, and housing assembly? I have everything but the actual fork itself for the three speed (older pre '74/75 transfer case). I also have the three speed linkage which mounts to this housing as well if you need it.
The three speed front extension and four speed linkages will NOT MATE when mounted on a four speed transmission (I know 'cause I tried).
If interested send me a PM
Wanted- Clear Fj40 Title
I just bought a 75 Fj40 and it has no title. This vechile changed hands more than once and the title was lost by one of the owners. If somebody has a clear title and vin plate that goes on the drivers side door please contact me via email. The state that I live in won't do reconstructed titles. So if anybody can help me out, I'll make it worth your while. I live in Pa. Thanks, Pete
I just bought a 75 Fj40 and it has no title. This vechile changed hands more than once and the title was lost by one of the owners. If somebody has a clear title and vin plate that goes on the drivers side door please contact me via email. The state that I live in won't do reconstructed titles. So if anybody can help me out, I'll make it worth your while. I live in Pa. Thanks, Pete
Wanted-15x8 or 15x10 wheels
I need a set of 4 wheels, 15x8 or 15x10 for my 74 Fj40. Wagon wheels are fine, I'm trying to keep the cost down, they are for my wheeling cruiser. I live in Pa. If anybody can help me out, drop me a email. Thanks, Pete
I need a set of 4 wheels, 15x8 or 15x10 for my 74 Fj40. Wagon wheels are fine, I'm trying to keep the cost down, they are for my wheeling cruiser. I live in Pa. If anybody can help me out, drop me a email. Thanks, Pete
Wanted- Clear Fj40 Title
i have a title but no id plate, i think it is to a 77 or 76. the vehicle burned. and was cut up for scrap. i think i may have an older title too. i lost 5 cruisers in a fire. i would be happy to help you if i can.
i have a title but no id plate, i think it is to a 77 or 76. the vehicle burned. and was cut up for scrap. i think i may have an older title too. i lost 5 cruisers in a fire. i would be happy to help you if i can.
