I've got the rear hatch handle, pedal pads, and possible the speedo needle & glass (not sure I have just a needle).
http://www.cruiseroutfitters.com
http://www.cruiseroutfitters.com
Wanted FJ60 Manual (1 Viewer)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I'm moving this post to Parts Wanted so you'll get better exposure.
Put a filter in while you're at it...
M
Put a filter in while you're at it...
M
need brown carpet for fj60
i need the front carpet, brown, for the front cabin of fj60.
used and cheap is what i need.
PM me if you got it.
-pat
i need the front carpet, brown, for the front cabin of fj60.
used and cheap is what i need.
PM me if you got it.
-pat
fzj80 driver side, front bumper
i need one of those side plastic "wings" on the front bumper (driver side) it is a 94 the bumper is charchole color
thanks all
i need one of those side plastic "wings" on the front bumper (driver side) it is a 94 the bumper is charchole color
thanks all
a 60 and 40 PS cooler tube are not the same, but it might work
how about a small trany cooler? thats what I used, even though I had the stock cooler tube
John
how about a small trany cooler? thats what I used, even though I had the stock cooler tube
John
orangefj45
Supporting Vendor
like john said, why not run a small transmission cooler. i'm pretty sure simon at www.faultlinefab.com is going do be doing another cooler give-away shortly, maybe you'll get lucky. otherwise you should be able to get one at a better auto parts store or from somebody like jeggs or summit. should cost you between $20-40 depending on style, size and manufacturer.
i sell them at work as well.
i sell them at work as well.
orangefj45
Supporting Vendor
there's a detroit on pbb right now.
orangefj45
Supporting Vendor
where are you?
I have a pair of aprons for $30 plus the ride. They have been sand blasted, but need to be primed.
bump
bought SOR top today
Jason, thanks for the detailed analysis of both tops. I called both companies and decided that the price was not that much different becuase I already have the metal strip that works with SOR's top. TPI wanted $69 for the top and another 25 or 30 for the "round" style channel. In talking with the guys at SOR, their top is much nicer with internal straps that line up with their roll cage to help prevent wind flap...hopefully, it will line up with my Metal Tech cage. It was $130, but I am think it will work better for me long term. It also has a "sunroof" that you can open or close to light with velcro. Thanks again for your information! Jim
Jason, thanks for the detailed analysis of both tops. I called both companies and decided that the price was not that much different becuase I already have the metal strip that works with SOR's top. TPI wanted $69 for the top and another 25 or 30 for the "round" style channel. In talking with the guys at SOR, their top is much nicer with internal straps that line up with their roll cage to help prevent wind flap...hopefully, it will line up with my Metal Tech cage. It was $130, but I am think it will work better for me long term. It also has a "sunroof" that you can open or close to light with velcro. Thanks again for your information! Jim
Heres another picture for anyone that is curious about what is actually needed.
lowenbrau
SILVER Star
On further inspection, the fronts could use some body work. The drivers has a couple of rust bubbles in the middle and the pass has a crusty chunk at the lower back edge. You decide. I'll take $350 for the set.
lowenbrau
SILVER Star
Its straight but the chrome on the feet is a bit pitted.
4 speed bell housing
I am looking for a 4 speed bellhousing in CA, either So Cal or the Bay Area
I just dont want to pay shipping.
Thanks Ian Rogers
I am looking for a 4 speed bellhousing in CA, either So Cal or the Bay Area
I just dont want to pay shipping.
Thanks Ian Rogers
I have a tailgate off of my 94 truck. Dont know what shipping would be on it. I also have a set of perfect doors i need t get rid of too. I am in Maryland 21713. color is grey/silver (stock color).
Tailgate is going to metal recycler tomorrow otherwise.
Tailgate is going to metal recycler tomorrow otherwise.
I will say that one bonus to having the TPI top is that it uses the same rail as my old Kayline top, so I don't have to swap rails to put my softtop on. Just another thought.....
