Wanted FJ60 Manual (66 Viewers)

[clemson55]

pilot bearing

I need a pilot bearing for my 3 speed tranny on my f engine in my 1973 fj55. So if anybody has a spare laying around let me know I'll toss a few bucks your way. Thanks

 

[usmcruiser]

Still looking for 55 rear spings.

 

[teapot]

Sorry to hear that, i cannot split them like that. sounds like you might have a hard time with just those pieces.

ya, i might have to go to s.o.r. for those parts.still worth a try.

 

[LifeIsGood]

265/75/16 tires for winter-Northern VA area

Looking for a set of tires in the 265/75/16 neighboorhood. Northern Virginia Area so say no more than 100 miles from Zip Code 20176. Can be just about any tread pattern as long as they are aggressive enough for the snow. Thanks

 

[Jim S.]

doors driver side & pas/side 78 40

Need drivers side in good shape , door only I have glass & innards. Pasg/side could be a candidate for a half door. I'm in Dallas - Ft Worth area of Texas. Thanks, Jim Sills

 

[BLKDOG40]

WTB: 10 spline 4wd SM465

WTB: 10 spline 4wd SM465 in good condition
Im in so cal (San Diego) I guess it can be shipped, if you don't mind.
Thanks!

 

[amandap]

PS Box hose fittings for 85 toy pu 4x4

need 'em bad...conversion on FJ40 using GM Saginaw pump and 85 box. Thanks.

 

[NorCalDoug]

how much do you want to spend? I have 4 w/tires installed and 1 w/no tire. That's the good news. The one w/o the tire is a chromed/polished rim. The non-polished rim has a tire on it -- and it seems as though that's the one you want.

So...I'd need to have the tire yanked off that one and installed on the other before I can sell the rim to you. If you want to pay for this (I may be able to arrange to get it done for free, but am not sure).

The rim's not near perfect. I've wheeled it, so there are scrapes, but no major damage. She's just not as pretty as she used to be.

PM me if you're interested.

 

[scottm]

Try http://www.mcmaster.com/ page 1061, about $15 each. End fittings on page 1064. Your springs are probably made by Suspa, there are only a few common brands. This summer I did a bunch of research on gas springs for some machines I built, you should be able to get them from various industrial suppliers, especially hydraulic suppliers.

 

[skyshark186]

40 Inspection panel

Need one with the X pattern and four mounting bolts. Cheap would be great. Close would be cool too. Let me know what ya got and price. Thanks

 

[e9999]

just came back from a trip, but as usual, Junk is on top (!) of things...!
thanks
E

 

[drohweder]

Accepting Donations--FSM Charity Foundation

My organization helps those suffering from cruiser retardation, I am the poster child and need some assistance. For you crack cruiser mechanics who have it memorized....mind mailing me your FSM for a 1971 FJ40 and 97 FZJ 80?

Anyone got one laying around that they are not using? Let me know. Thanks

 

[DomSmith]

Are you selling the 4-speed cover plate?

 

[lx450landcruiser]

wanted free head rest for 80-100 for experiment

wanted free head rest for an 80 or 100 series cruiser
the condition is totaly unimportant as i plan to do major modification to it.

Ill pay shipping and might be willing to give some small fj40 stuff in trade?

mike

 

[ScottFJ40]

Are you selling the 4-speed cover plate?

I will sell it for $20 plus shipping, since that's what it cost me to buy oe for a 3-speed if you are interested.

 

[uzj100]

WTB - 100 Series Running Boards - for a '98 or '99 Model

I am looking for some inexpensive factory running boards for a '99 LC. I need black. I bent mine up pretty badly 4 wheeling and need to replace them.

I am located in Raleigh, NC.

Contact info
Andrew Roane
919-523-6985
roane3@hotmail.com

 

[skyshark186]

By the way its for the front doors. Whoops, forgot to mention that. Anyone?

 

[DomSmith]

Got one, but thanks.

 

[Outback]

If you need the return line nipple, it is only $10 from CDan. Just ordered one.

For the high pressure line, get one custom made. The fitting size is 16x1.0 mm at the minitruck PS box, inverted flare nut. Most any hydraulic shop that builds hoses will have that size.

I actually found a fitting/adapter that was 16x1.0 mm male on one side and SAE of some size female on the other side. This way if I need a PS hose made out in the boondocks they only have to come up with SAE fittings to make a new one since I have a saginaw pump too. Brilliant!!!!

Jody.

 

[ScottFJ40]

Got one, but thanks.

You're welcome.