Wanted FJ60 Manual (67 Viewers)

[drohweder]

If you want a stock roll cage let me know. I can get you one in the Bay area for Cheap!!! Maybe free.

 

[drohweder]

Got one from napa for $10. Mounting holes are wider so you need to drill. Works just fine from a mounting standpoint. Wouldn't ya know, my stock one started working so I never put the new one on.

 

[drohweder]

I got one, can send you pics if you want.
Needs a little work but it's all there..

Dang. I just PMd ya in the forsale section. Let me know if he doesn't buy it. I'll give you $151

 

[desertdude]

Post this HERE you will get many replies

 

[Home Built]

no one has given me any money yet.. In fact he has not even answered me, your first, so if you want it it's yours..
first one with the cash is the buyer..

 

[Home Built]

got a stock, needs some painting and stuff, but all there.
$20.00??

 

[16-in-Dec]

Looking for sides and brackets for a stock rollbar. I have a good center but nothing else. Need in TExas 79602

 

[on49st]

distributor needed 2F

I need a distributor for a '84 2F motor, stock or after market on49st@yahoo.com

 

[Landpimp]

just a FWIW, look for any from 8/80-87 fj40 or 60, they are the same except the 40 ignitor will not have the tach hook up for a fj60, but its easy to get around that, just wire it to the coil.

 

[SpeedyCycles]

Here is a more precise list of what I need:


OK, here is a more formal list from my dealer:


front bumper 5211160913
left 5210360200
right 5210260200
Left fender flare 7508660020D0
quarter sidemold 7560660020D0
Drivers side rear door
" " 1/4 panel
Running board
Hook from the hood
Fuel door


My paint codes are 1b1 and LC43


Thanks,

Frank

 

[phishtaco]

94 FZJ80 Receiver tow hitch

Just looking for a cheap class III receiver, the closer to OH the better.

 

[HI^C]

76 2f dizzy, 73 f dizzy, 6 to 1 header

NEEDED 76 dizzy and header yesterday, so this is priority.

Interested in aftermarket dizzys, or even just the gear.

no i do not know the breakdown on which dizzy goes with which ignitor, but
i am researchin.



damn it bought two more 40s in the last 2 weeks, both need dizzys. one
runs delco sucks no advancement.

 

[lx450landcruiser]

tailgate for fzj80-lx450

looking for the rear tailgate for my 1996 lx450. Not sure if other years will fit but let me know what you have. condition is not an issue other then it has to funtion. any color and can have the carpet or not.

thanks

 

[mooker82]

Passenger side rear interior trim for FJ80

I want the back plastic trim panel for the passenger side. The one with the speaker grill in the cargo area. Tan in color for a 97 40th Anniversary.

 

[Jay Ann]

Stupid Antenna!!

The electric antenna on my 89 fj62 bent some how, and now it won't go all the way up or all the way down. Is there a way I could fix this? Or Find a Cheap Replacement?

 

[Home Built]

Got one here..

http://cgi.ebay.com/ebaymotors/ws/e...&item=7933341530&rd=1&sspagename=STRK:MESE:IT

This is the kind and bolts to the front of the motor..

 

[airon23]

thanks jeremiah for the console.

 

[denis]

ttt

 

[cruiser_guy]

I think that the mast is replaceable. You'd keep the old motor and just change the telescoping mast.

 

[Scott R]

Damn, where was this last week? I am always in the wrong place at the wrong time. Fedex is set to deliver a set from SOR to my house today.