Wanted FJ60 Manual (51 Viewers)

[mr_manny]

found one local...

thanks to all who replied,
manny 72fj40

 

[turbocruiser]

Wanted: 95-97 MAF Sensor for 80 Series - Does not matter if its broken!

Hi Folks, I'm looking for a MAF sensor shell for a 95 to 97 Land Cruiser 80 Series w/ 1FZFE engine. It does not matter if its a non-working MAF as long as the shell of it is intact. The perimeter ring on the exit side of my MAF is broken (see photo) and I'm simply trying to avoid purchasing the whole thing just for that perimeter ring! If anyone has one, please PM me. Thanks so much.

 

[VTCruiser]

WTD: FJ40 Steel wheels... East coast

Looking for up to 5 70's toyota steel wheels. Condition i not so much an issue, but i want them CHEAP (free?).

I am currently in Clemson, SC, and am willing to travel within reasonable range to avoid shipping. I will be home in Vermont most of December and would be willing to travel new england. If timing is flexible, I could make a detour on my drive home in december. I usually take 85 to charlotte, 77 to 81 into NY and then over to VT.

Thanks!

 

[72cruiser]

"WTD"????

'wanted-to-dent'
'wanted-to-destroy'
'wanted-to-decorate'
'wanted-to-defenestrate'
'wanted-to-droponjunkshead'

haha


the cruiser made it to class this morning, so i guess it'll be aight for a couple days....

malphrus

 

[84rocktoy]

Wanted good 2F engine

If anybody has one or knows of one near Sacramento CA. please email me at villegasf@tcha.net or call 530-591-4697
Thanks,
Fernando

 

[polarweasel]

tire chains

I'm looking for a set (4) of tire chains to fit 33x12.50/15 tires. I'm in northern Colorado, and would prefer Denver or north, but I'll consider anything...

Also have a set of 4 chains to fit 30x9.50/15 if anyone wants those.

Alex

 

[denis]

RC 4.10 R&P

OK, I'm changing my plans slightly. I could really use a stock front 4.10 r&p set from one of you 80 series owners re-gears... preferably cheap, in useable shape. That's for my racing BJ40 project

Thanks!

 

[clownmidget]

Denis,
sent you a PM
Mike

 

[montocr]

Wanted: 100 series reciever hitch

I need a reciever hitch for 100 series.
Thanks
carl
montocr@yahoo.com

 

[informationjunky]

e-mailed ya

 

[orangefj45]

i should have one you can have.

 

[turbocruiser]

e-mailed ya

Thank you very much, I emailed ya back, I was not able to PM you probably something I am doing wrong. If you do not mind, can you PM me a phone number as I have two quick questions about this and another part. Thanks.

 

[VTCruiser]

yeah that would be LAZY for "Wanted"....

glad to hear the 40 is still game, haha

 

[bjowett]

I'll ask a buddy of mine if he has any floating around. He lives in Bennington VT.

 

[ButchUSAF]

MINI Truck PS

I'm looking for the mini truck ps gear box and pump/hoses. I need all the parts to convert my 40.

Butch

 

[Romer]

Resistor for Blower motor

I need a resistor for the blower motor in my 77 FJ40. I probably will have to make one. Thought I would see if anyone had one lying around.

Thanks,

Ken

 

[thorvald]

do a search, pretty sure ive seen some people have come up with other solutions to it than stock. mine went bad and was able to find one in junk yard luckily.

good luck

 

[Romer]

I have a link on how to make one. Just wanted to see if someone had one.

 

[Swaycat]

Brake Master Cylinder needed

I need a brake master for a '70 fj40, non-power (one resevoir) asap. Will buy or maybe trade for ??? My 40 is all stock.

 

[thorvald]

i see cruiserparts.net has a "aftermarket" new one for $25, have you checked with c-dan to see if he has one "hoarded" away?