Wanted FJ60 Manual (38 Viewers)

[tucker74]

Check it - nice and cheap!

Tucker

 

[BKerr]

Where can you get those?

 

[skyshark186]

Sorry.....neglecting the thread. Ive found them several times by looking up warrior half doors on google. Im gonna buy some in about a month. Just thought id share the love.

 

[skyshark186]

Decided not to be lazy. Heres your link man.

http://www.rubicon4x4.com/catalog/product_info.php/products_offroad/479

 

[john7483]

Looking for seat belt harness for the floor?

Looking to get my crow seat belt to work on a 1967 fj40 with orignal seats..
I nead to get seat belt harnbess's for the floor to mount the seat belts?

any one have some or any other ideas,,,,
thanks
I'm in NJ and looking for help

 

[john7483]

floor seat belt harness's needed...

Does any one have seat belt harnesses for the floor to mount the seat belts to?

thanks john

In NJ

 

[yoda-g3]

I think that I only need the carrier itself (#11). But I gues it depends how alike '69 and '70's are. I'm assuming that yours is a 30 spline? And the ring/pinion gear ratio is the same for both our years right? I haven't seen what the damage is, if there is any to the ring and pinion. How much are you looking to get out of it? Depending on that I may get some additional stuff like the ring / pinion, and maybe some berrings. I'm pretty sure I won't the whole third member though that would definitely add to shipping co$t.

Let me know!


Thanks!

 

[Vitesse_6]

Hi John.
I have a set from a 71, Im not sure if they are stock or not, They are dirty but are servicable.
I will got a pic for you tonight if needed.
If you want them ...how does free sound? if you say shipping.
Good luck

 

[john7483]

thanks...

Free sounds amazing thanks......

I think i could cover the shipping hahahaha.... YEs thanks

photos would be great...

thanks

 

[Dan_J-spec_fj62]

ok so its a cheep ploy sorry no link just looking for a mirror for the wifes truck

Yeah lookin for a mirror for my wife's 80 left side, hers has the shakes, bad and the tighten the screw trick dosn't work any longer...... some internal bits are broken

lookin for cheep...

thanks

dan

email or pm me


danielolsen1@mac.com

 

[Stumper]

I have the rear seat you need, in great condition, just needs a steam clean. Located in SLC, but may be headed out to Fruita sometime soon. Shoot me a PM and I can get you some pics....also have entire interior, minus carpet, if you need anything else. The stripped carcas of this 60 is headed to the junker later this week, so let me know what you need.

Russ

 

[Vitesse_6]

Hi John.
I just had a look at the seat belts, They are fron 1971...However, I cant give them to you in the condition they are in, I havent seen them for a few years, The people who welded in my cage had slag dripping ALL over them, so for safty reasons I dont think I could give them to you, Not to mention they are 33 years old.
I was thinking about this, All you really need to do is buy some belts from NAPA, Pepboys'....etc. get 4 metal plates 1/4" thick and about 6-10" in diam. drill a hole the size needed right behind the seats on the upper step area, Bolt the belts in with the plate under the body, This helps if the body is rust free
I didnt take pic's I didnt think it would be necc.
Im also sorry to have gotten your hopes up, I just feel it would be for the best to get new belts.
Good luck, If you need any other info feel free to PrivateMessage me.

 

[john7483]

thanks for the help though... I have a place that i think I'm going to use do the bar for my shoulder harness so I thinK i might ask him to make some plates for me... thanks for all the help to bad they weren't in great shape.. thanks for loooking out..
I didn't know how to private message you back sorry...
new to this whole thing...

 

[godzilla]

Wanted- Used Conferr Fj40 Gas Tank

I'm looking for a used conferr aux fuel tank for a fj40. Send me a pm or drop me a email. Thanks

 

[southerncruiser62]

Half Doors

Check the for sale thread "FJ-40 Parts in NC" by R.K. He has a nice set of half door shells from older model cruiser. They can be cut the way you want and they are steel. Not sure you are looking to go that route but thought i would let you know. R.K. is a nice guy to get parts from.

 

[skyshark186]

Need Old Style Windshield

I have a new style windshield on my 73 FJ40. Wont work with the top i bought.

Heres what im looking for

Windshield frame-good condition, paint doesnt matter, NO rust through
Windshield glass-preferable that it has it, good condition is excellent
Wiper motor and arms-a must, i dont have time to look for parts as i need this for winter.

Let me know what youve got and if your interested in a trade for my later model windshield. Good metal, paint, working wiper motor, and the glass is ok but it is cracked in one place. Ive been driving with it for a while, doesnt impede vision.

Thanks, and im kinda in a hurry so any help is appreciated.

 

[LifeIsGood]

FJ80 16inch alloy near Northern VA

Looking for one FJ80 factory 16inch alloy as a spare. Would prefer local to Northern Virginia to cut down on shipping. Thanks

 

[baloo]

Spacers

HI I WTB some 1" to 1.5" wheel spacers for my FJ62. Thanks JL

 

[bamachem]

Looking for a single LX450 wheel - NOT chrome - Standard Finish. No center cap needed. Prefer decent condition but DOES NOT have to be perfect. Post or PM me pics w/ prices. Email: bamachem@yahoo.com will get the quickest responses.

BUMP...

 

[92fj80]

ARB front bumper for 92 fj80

winch or non doesnt really matter would like one in pretty good shape. thanks