Wanted FJ60 Manual (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Landpimp,

That's it! OEM pump, OEM heat shield with three attachment points (nuts tacked on heatshield). No brackets or attachment points on the pump. In your pictures it looks like you used brackets from a non P/S box? I see that one of the bracket nuts is not used. I'll have to revisit doing that. I thought it would be as simple as obtaining the correct brackets. Thanks for the pictures, and if you come up with anything I'd appreciate hearing about it!

Cheers,

Dave
 
CruiserOutfit- I think I need to know more about what I'm asking before I can order anything. I did'nt realize there were so many choices.

The other offer for one- I would like to get two at the same time, but I'll keep it in mind. Thanks, Luke
 
Cheap 2" reciever for 80 series

rying to standardize my stuff.....whose got the cheap 2" reciever hanging in the garage after they put on a nice beefy reear bumper????
Rob M concord, MA
USA
'94 fx80
 
LukeZero said:
CruiserOutfit- I think I need to know more about what I'm asking before I can order anything. I did'nt realize there were so many choices....

Call me if you need a hand... ALL of the fine spline models have the same pinion spline specs... the only thing that changes is the driveline pattern... measure yours and call me :D
 
Wanted, hard half doors for a 78 FJ40

Anyone know where I can get these? Just purchased a 78 factory soft top and looking for doors. I know SOR has some in diamond plate and aluminum but I was really hoping for steel. I am in Houston but will ship from anywhere with picsture provided.

Thanks
 
wtb fj40 77 windshield frame and glass

looking to finish my project..... my location is waterford michigan 48329 for shipping
PM a price with shipping..... pictures please if you already have them

thanks Darren

:popcorn:
 
seems its easier to import into canada than out, couple people on the board that have done it, one is Tyler. might want to talk to them.
that opens up pretty large market, though Id stay with a diesel since you have that option more readily available. bj60 or hj60 crushersrule.com is a place that have seen that imports japanese vehicles into canada.

good luck.
 
BTT, still looking...
thanks
Eric
 
BTT, still looking...
thanks
Eric
 
still looking for a used rack
thanks
Eric
 
FJ 62 Mirrors

Some rat bastard vandalized my truck. Not too bad, but they did break the side view mirror off. (Drivers side) I would like to get a set of 62 side views, if they fit. Does anyone have an extra set laying around?
 
Front fender mounted FJ55 lights

I require either the older rectangular light for the FJ55 both sides (two lights). I don't need the lenses just the fixtures but they need to be decent.

OR

Both sides of the newer lights that mount in the same location complete with lenses. Again they need to be decent.

This seems to be the most difficult thing to locate in order to get the FJ55/3B registered.

Note that the FJ55 is my daughters truck and is in Vancouver, B.C. NOT Guatemala.
 

Users who are viewing this thread

Back
Top Bottom