Wanted FJ60 Manual (61 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
sup,
i'm also lookin for a headlight switch for my 72.
i'm no good electrically, so why wouldn't later years work? too much stuff or something?
malphrus
i'm also lookin for a headlight switch for my 72.
i'm no good electrically, so why wouldn't later years work? too much stuff or something?
malphrus
IFS Steering box
I'm looking for a Toyota IFS power steering box to hopefully put on my fj40 for Power steering.
If anyones got one I would like to purchase it.
Rattle Rattle
I'm looking for a Toyota IFS power steering box to hopefully put on my fj40 for Power steering.
If anyones got one I would like to purchase it.
Rattle Rattle
Wanted Wheels
Wanted stock wheels for 1974 FJ40. I would like to find either the hubcap style wheels that work with disc brakes or the white wagon wheel style wheels. I would buy a tire and wheel combo if the tires were 33 x 9.5's
todd.barnes.nm75@statefarm.com
Wanted stock wheels for 1974 FJ40. I would like to find either the hubcap style wheels that work with disc brakes or the white wagon wheel style wheels. I would buy a tire and wheel combo if the tires were 33 x 9.5's
todd.barnes.nm75@statefarm.com
Landpimp...
Thanks for the reply... problem was that my manual box heat shield (on two boxes) were completely rotted out. Obtained an OEM P/S box and eventually a OEM P/S box heatshield from James at Cruiserparts.net for my renovation and when I finally to this part of the project I discovered that the pump had no brackets to mount the heat shield with. He currently doesn't have any either. Hence, my post and search for brackets. Trying to stay relatively stock in some areas, and would prefer not to fab brackets. If you know anyone, anywhere...
Cheers, and keep on Cruising!
Dave
Thanks for the reply... problem was that my manual box heat shield (on two boxes) were completely rotted out. Obtained an OEM P/S box and eventually a OEM P/S box heatshield from James at Cruiserparts.net for my renovation and when I finally to this part of the project I discovered that the pump had no brackets to mount the heat shield with. He currently doesn't have any either. Hence, my post and search for brackets. Trying to stay relatively stock in some areas, and would prefer not to fab brackets. If you know anyone, anywhere...
Cheers, and keep on Cruising!
Dave
Seat search...
I have front seats and the rear pan/hardware and backrest/hardware from an 83. Would requie major cleanig if I recall, and most likely reupholstery. Don't know what level resto/renovation you are doing, but if interested PM me.
Dave
I have front seats and the rear pan/hardware and backrest/hardware from an 83. Would requie major cleanig if I recall, and most likely reupholstery. Don't know what level resto/renovation you are doing, but if interested PM me.
Dave
WTD- Minitruck pinion flanges
Need set of pinion flanges from solid axle minitruck (fine spline). Changed gear ratios, had old course spline pinion, now have fine spline pinion, truck no move. Please help.
Need set of pinion flanges from solid axle minitruck (fine spline). Changed gear ratios, had old course spline pinion, now have fine spline pinion, truck no move. Please help.
Right Rear Ambulance Door.
For a 77 FJ40.......NO RUST NO DENTS
thx,
R.
For a 77 FJ40.......NO RUST NO DENTS
thx,
R.
- Joined
- Sep 28, 2002
- Threads
- 558
- Messages
- 8,122
- Location
- Kamloops, BC Canada
- Website
- www.shopraddcruisers.ca
Cheap rust free 55
Its kind of a joke but I am looking for a cheap no drive train even no axles FJ55 in the Oregon Washington area, better yet Vancouver Island.
In no rush just thought I would post up to see if someone has something laying around that wants rid of it.
Rob
Its kind of a joke but I am looking for a cheap no drive train even no axles FJ55 in the Oregon Washington area, better yet Vancouver Island.
In no rush just thought I would post up to see if someone has something laying around that wants rid of it.
Rob
if you don't find a perfect one, i've got a good one. minor denting that a shop could fix and cleaned up would be great...$60. missed you at the meeting...still have the shift boot and vent door.
Last edited:
then bend over.grant5127 said:
I have a set of four chrome OEM wheels. They are not in perfect condition, but let me know if they'll work for you.
I have a second set of four chromes that I will be parting with a little down the road once I find some wheels to go on my 45.
https://forum.ih8mud.com/attachment.php?attachmentid=3597
I paid $125 last summer for them, but turned out I didn't need them after all. Anyway, I'd like to get $100 and will gladly hold them for you as long as necessary. They are located in Fort Collins.
I have a second set of four chromes that I will be parting with a little down the road once I find some wheels to go on my 45.
https://forum.ih8mud.com/attachment.php?attachmentid=3597
I paid $125 last summer for them, but turned out I didn't need them after all. Anyway, I'd like to get $100 and will gladly hold them for you as long as necessary. They are located in Fort Collins.
looking for something like this?
thats a OEM fj40 PS box.
not sure how you can replace the mounts on the box.......I thought they were part of the box?
Let me look around......
thats a OEM fj40 PS box.
not sure how you can replace the mounts on the box.......I thought they were part of the box?
Let me look around......
Silver 1997 LX450 body panels
I purchased an LX450 with some dents/scratches. I need the entire front fender, and a drivers rear door or just door skin, and drivers side running board.
Any help would be appreciated.
Frank
SpeedyCycles@aol.com
417.889.RACE
I purchased an LX450 with some dents/scratches. I need the entire front fender, and a drivers rear door or just door skin, and drivers side running board.
Any help would be appreciated.
Frank
SpeedyCycles@aol.com
417.889.RACE
Hello,
Is the bottom solid, hard to tell from the pics...
thx,
you are really helpful.
R.
Is the bottom solid, hard to tell from the pics...
thx,
you are really helpful.
R.
