Wanted FJ60 Manual (3 Viewers)

[cruiser_guy]

Re:BJ60 Accelerator Brackets/Linkage

Mike,

I'm in the process of dropping a 3B into an FJ55 and I have the cable described above for that project. I could trade if the BJ74 cable would work for me as well. Please describe the differences so I know what is going on.

 

[Bull22]

I need a 3 speed tranny

sent you an email.

 

[Bull22]

wtb: tubing bender

how much are these benders and what can they handle.

 

[Bull22]

1978 fj40 frame

sent you an email

 

[RockDog4x4]

60 Series windshield trim strips needed

Hey. I just replaced the windshield on my 62. The trim strips did not fair too well. The plastic inserts (attached to the underside of the chrome to help it keep its shape) were so badly rotted that they were stuck to the weatherstrip and just came out in pieces. If anyone has a parts 60 or 62 and wants to pull the windshield trim, I am a buyer. It should come off pretty easy on most rigs. You just lever it out with a plastic putty knife or the like. I can probably salvage all the parts from mine (if I have to...corners, sides and top) except the lower strip. I'll buy just the lower strip or the whole set (if it makes it more worth someone's time.)

Thanks.
Grant
grant@fastasset.com

 

[scjudge1]

wanted

Thanks the reply but i think i found one.

 

[scjudge1]

Auburn limited slip

I am looking for a used [but working ] limited slip for my 76fj40 rear differential. Can't afford a new one and the last winter here in Erie Pa seemed to be nothing but snow, ice, and slush forever. If anyone has one available please let me know. Thanks.

 

[element057]

wanted

i have a 87 fj60...looking for running chevy 350, t-400 auto tranny and dayna 44's.
will pay fair price. thank you

 

[cruzer]

wtb: tubing bender

a NEW bender and 1.75 die is about 500.00 bucks and a tube notcher is another 175.00(not needed but advised)...so total is a about 700 thats not a bad deal if you get 25% off of an order...i am "in" if you guys can get me one for under 400.00 plus shipping....let me know

stubieone@hotmail.com

Stew

 

[nichols]

steering arms or double arm

New hy-steer arms $165 + shipping setup for heims.

 

[Bucephalus]

FJ-45 Longbed Tailgate

I'm on the lookout for a non-rusty tailgate for my Longbed FJ-45. Mine is a '78 but I think the tailgates were the same for all years. Any leads would be appreciated. Thanks!

Sasho
Northern Michigan

 

[LandCruiserPhil]

Re:wanted

What are you located?

Phil

 

[inacoma]

wtb: tubing bender

I'm in for 25% off as well.

Kumar

 

[TJDIV]

Wardens Adapter for 1970 FJ40

TommyIV@cox.net

Thanks.

 

[alp61]

Brush Bar Wanted for '97 LC

Looking for a brush bar for a '97 LC. Black only.

 

[Poser]

Re:Wardens Adapter for 1970 FJ40

Wardens made quite a few different adapters...narrowing it down a bit may help finding what you are looking for...

Just an idea...


Good luck!

-Steve

 

[jkastning]

alternator

need an alternator for a 3fe. email me with a price including shipping

Jarod

 

[toycrusier]

defroster hose

Mines cracked where it goes into the heater. Just looking for a good one.

 

[notagp_afj55]

defroster hose

NAPA sells plastic hose wrapped in wire by the foot.
you might try them if all else fails..
JimK

 

[TJDIV]

Re:Wardens Adapter for 1970 FJ40

[quote author=Poser link=board=6;threadid=13962;start=msg129811#msg129811 date=1080689291]
Wardens made quite a few different adapters...narrowing it down a bit may help finding what you are looking for...

Just an idea...


Good luck!

-Steve
[/quote]


Sure, good idea. For my brakes. 1970 single res. 3 bolt master to a dual res. 4 bolt. Rumor has it they shut down a year ago though huh? Well I'm f*cked then aren't I?

There are other options. Like Flintstoning it.