Wanted FJ60 Manual (4 Viewers)

[Cruise1977]

Re:NEEDED BAD!!FJ40 Gas pedal assembly

I guess its for the 72, in which case I think pedal I have will work. Your truck has a cable linkage right? You can e-mail me dirrect at cruise1977@aol.com.
- Josh

 

[Cruise1977]

Need a MINT pre-79 frame in Mid-atlantic area

If your interested I have a '77 FJ40 with a good frame that I'm selling. Its a parts or project truck. Tubs all rusty, 2F is mostly stripped, and the trans is gone. It has the hardtop and doors which are in average condition. It has a good windshield frame. And of course the disc brake front end. $1000.00. You can contact me dirrectly at cruise1977@aol.com.

-Josh

 

[Cruise1977]

Stock rims for 77 FJ40

I have some for sale in Northern VA, but I'm not interested in shipping them. Some still have tires on them and they need to be sanded down and repainted. No covers. $10 each. You can see them at www.members.aol.com/cruise1977 you can e-mail me dirrect at cruise1977@aol.com.

-Josh

 

[Cruise1977]

Hedlight Bezel Needed

I have one, I think it might be a little rusty, but not bad, just needs cleaning up. If your still looking for one contact me dirrectly at cruise1977@aol.com.

-Josh

 

[Cruise1977]

Wanted- Rebuilt Low Mileage F Motor

I have a 74 F that you can have if you want to pick it up. I think it needs some rings though, the gut I got it from said it smoked. I just thought if you were going to rebuild an F you might want the full filtered oil. cruise1977@aol.com

-Josh

 

[cavsfj40]

i want some TJ fender flares

i am looking for some tj flares for the rear. i will pay 50 for the pair. Original equipment prefered.

 

[Cruiser_Nerd]

Early F upper t-stat housing

I've got a couple, but there's some pitting going on too. Let me know if your other ones fall through.

 

[xumFJ40]

Idle Solenoid

Like the discription says, I need the Idle Solenoid to get my truck running.

Located in TX,

Thanks

 

[cruiser_guy]

Upper front passenger door hinge FJ55

I need a front passenger door upper hinge for an FJ55. Our's is a '2/76 production if it makes a difference. Our's has excessive play and is causing the door to sag too much (more than I can counteract with adjustment in the hinge mounting).

 

[greid]

Rear bumper for 64 FJ45 Wagon

I have a '64 FJ45 Wagon (four door, not troopie) in need of a rear bumper. I'm looking for an original, as straight as I can find. Let me know if you have one you're willing to part with.

Glenn Reid
Woodside, CA

 

[Willy]

Idle Solenoid

check your pm

 

[Landpimp]

Idle Solenoid

Idle Solenoid Part Numbers:

2 Wires (8/80-93)

GP Sorensen 7791933

Niehoff Ignition FS637

Borg Warner ECS508



1 Wire (1/75-7/80)

GP Sorensen 7791930

 

[RJHR]

michelins for an 80

I need two very good condition Michelins for my wife's 80. OEM size and model please.

Thanks!!

 

[iron_giant]

fj40 wiring harness fj55 rear spings

Scott,
pm'd ya.

-david

 

[Socrates]

Front Axle Hub

... Looking for the front axle hub to fit a 68 FJ40. I believe later years will also fit... til something like 74 or 75. Perhaps some of you know better than I ?

Anyways I'll include a picture so you know what I'm talking about. My email is enosence@hotmail.com

 

[Wadesters]

Hedlight Bezel Needed

Hi, check the following site for parts I have including a bezel: http://www.fototime.com/inv/BB5A28DF1E1FF3C

 

[Mike S]

FJ60 little rubber thingey...

Mine busted - need a workable one if any of you have one. Toyota no longer carries the part.

Please check and let me know?

Thanks

Mike S
mike@uxcomm.com

 

[tltaylor22]

Re:75 or pre-75 hardtop for an fj40

Residual,
I'm in Orem. Let me know and I can take some digitals and email them to you direct before you take a trip down to look. Sorry It took me so long to get back to you. Been in Moab for a few days wheeling the 80. Too fun.

trent

 

[tltaylor22]

Re:Front Axle Hub

Socrates,
I might have one for you. the axle is a 69 but I haven't had time to pull it apart to see if it is any good. I'm in Utah.

Trent

 

[tlcgear]

Flat FJ40 springs

Looking for a set of fj40 flat spring so I can use them for a spring over. I have a really good set of stock ones I can trade. I have a good arch on the still. I wouldn't want to pay for shipping but If we are trading, I would.

Thanks.