Wanted FJ40 Flywheel (P/N 13451-60060), hub, fork & fork ball (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 11, 2010
Threads
18
Messages
50
Location
Northwest Pennsylvania
Vehicle Model
  1. 40 Series
Location
Edinboro, Pennsylvania 16412 United States
I'm looking for a FJ40 flywheel P/N 13451-60060 for 8/74 and newer models, 4-speed transmission along with the clutch hub, fork & fork ball in good used condition. I have a reconditioned 13541-60010 available with hub, fork & ball if interested to trade - see pics for the flywheel condition. Stamped fork has been sand blasted and painted with ceramic heat resistant paint.

13451-60010 FJ40 flywheel_02.webp


13451-60010 FJ40 flywheel_01.webp


FJ40 pre8-74 ClutchHubFork.webp
 
I sell the fork and hub in a handy kit, I also have the pivot balls new in stock, and I normally don't sell a flywheels as they are a finite amount but would be willing to if you purchased the other parts from me.
Am I remembering correctly, did I answer your question in the tech section, am offer to give you the pivot ball for free as well?
 
I sell the fork and hub in a handy kit, I also have the pivot balls new in stock, and I normally don't sell a flywheels as they are a finite amount but would be willing to if you purchased the other parts from me.
Am I remembering correctly, did I answer your question in the tech section, am offer to give you the pivot ball for free as well?
Thanks. Yes, you did answer in the tech section. I found a flywheel and it's on the way. I'll contact you later today about the hub/fork kit.
 
You still have the fly wheel and parts available? Looking for a flywheel and clutch to work with an H42 behind a 1f.
 
You still have the fly wheel and parts available? Looking for a flywheel and clutch to work with an H42 behind a 1f.
I have the resurfaced flywheel, clutch fork, clutch hub bearing retainer all pictured above, and the 3-finger pressure plate and clutch fork ball for the F engine 3 or 4 speed transmission. Let me know if you are interested in these and we can work out a price plus shipping.
 
Sorry phone posted repeatedly in a bad service area. Let me know if you end up having it. Could use it on a project I have. Thank you.
 
Last edited:

Users who are viewing this thread

Back
Top Bottom