ARCHIVE FJ 60 Rear Bumber

[IPOR]

This is Cam with Iron Pig Offroad.

Just wanted to say hey to all in the 60 forum

We have a great rear bumper for the 60 and 62 as you can see on our website

The point of this thread is to check interest in this product, as you guys already know it is easier and more cost efficient to make these in batches of 20 than just one or two at a time .

post up and let me know who would be interested

Thanks

 

[beaufort-fj60]

i'd love to see a front bumper without the brush guard to match IPOR's rear bumper.

 

[dtrain]

Do you have pics of tha bumper to post up?

 

[landcruiserjunky]

I'm interested in one that has QP wings and has your tire carrier. Any chance you guys can fab up somthing like that?

 

[IPOR]

Here are a few pics

 

[dtrain]

Does it come with a tire carrier? hitch? (edit: and if it comes with a tire carrier... how about a license place relocator if it covers the tire covers the plate)

Is it to early to throw out what you normally charge and then possible discount for a group buy?

 

[IPOR]

I'm interested in one that has QP wings and has your tire carrier. Any chance you guys can fab up somthing like that?

Yes we can add the wings to your bumper, but the difficulty of that, is how much of your QP is cut or raised. that I would need to know

Does it come with a tire carrier? hitch? (edit: and if it comes with a tire carrier... how about a license place relocator if it covers the tire covers the plate)

Is it to early to throw out what you normally charge and then possible discount for a group buy?

Yes it is a little to early but I am always open to working with the cruiser community, and if you can get together a good group buy I would be willing to give a discount.

Yes there is a tire carrier option for this bumper as is for all of our bumpers, depending on the bumper and the customer we can locate, drill and tap two holes for the license plate

 

[agent orange]

Hey cam, would it be at all possible to produce one of those bumpers with body of the bumper raised up an inch? The price on the bumper on the website is very reasonable and i like the construction, but ive got to have something to hide the body lift.

-Matt

 

[IPOR]

Hey cam, would it be at all possible to produce one of those bumpers with body of the bumper raised up an inch? The price on the bumper on the website is very reasonable and i like the construction, but ive got to have something to hide the body lift.

-Matt

yes matt if you wanted one, when they come in you can bring your truck up and we can add a piece in for you to hide the body-lift

 

[dtrain]

I will put this out there as a possible package/option.

The bumper pictured above but, would want to see a hitch (at least a 3k rating... probably means tying it into the frame or something... using stock bolts holes would be a puls), a tire carrier, and QP protection.

All based off of a stock setup 60 body (ie - no body lift, no QP trimming, etc...)

 

[CSA]

I'd be down for the rear bumper powder coated for a FJ62.

 

[IPOR]

I will put this out there as a possible package/option.

The bumper pictured above but, would want to see a hitch (at least a 3k rating... probably means tying it into the frame or something... using stock bolts holes would be a puls), a tire carrier, and QP protection.

All based off of a stock setup 60 body (ie - no body lift, no QP trimming, etc...)

Are you looking for something like this.

And thank you for your comments this exactly what I am looking for.

 

[FJ60_cruiser]

Are you looking for something like this.

And thank you for your comments this exactly what I am looking for.

Wowww that's a really nice bumper, that's what I'm looking for, how much could be price for one of those?

 

[dtrain]

feedback

Are you looking for something like this.

And thank you for your comments this exactly what I am looking for.

Yeah.. that looks good. I cant tell from the pic if there is a hitch reciever or not. Tnen just add recover piont.

Also... from the pic... I can't tell how much bumper is left on the other side but, it would be good to leave a little room in case future a fture swing out was needed (ie - gas cans, ladder, etc...)

 

[IPOR]

Yeah.. that looks good. I cant tell from the pic if there is a hitch reciever or not. Tnen just add recover piont.

Also... from the pic... I can't tell how much bumper is left on the other side but, it would be good to leave a little room in case future a fture swing out was needed (ie - gas cans, ladder, etc...)

That bumper shown was a one off bumper we made for the shop buggy when it still looked and was a Fj60.

The heavy duty recovery points are a standard on the 55, 60, and 80 bumpers we make as far as the reciever we haven't decided yet on that being a part of or add on the bumpers.

 

[Nickslexi]

Yup,

I have been eyeing this bumper but would like an integrated hitch and a cross-member to strengthen the rear section. Tire Carrier option would be great so that it can be bought in stages.

Let me know if a group buy is put together so I can get in on it... I want mine poweder coated.

Nick

 

[EarthX]

bumper

I'd be interested in the black bumper you pictured for my 60. Nice a simple, I like it.

 

[Max.Powerzz]

I've had your rear bumper on my wish list for a long time. I'd be interested, especially if there's a group discount. x2 on the option for gas can swing out. How flexy are the qp wings, are they damage multipliers?

 

[jgordon]

Seems like the ideal wing length would be between the one on your website and the one pictured there.

I'd definitely be in for a group buy. My preferences would be:
- slightly extended wings (but not full length)
- tire carrier
- a receiver as part of the bumper

Thanks.

 

[Godwin]

Can you still access the spare tire carrier once the bumper is mounted? I live in a salt free area so mine still works .