Builds First LC, HZJ77 Build "Kengo"

[Musafir]

I had bought rebuilt calipers a couple years ago so I broke them out since my pins were super corroded. The original are S12w and the new ones are s13w from a 92-95 4Runner. A little bigger pistons on it. That wasn’t intentional but I’m rolling with it. Not uncommon over on the 60s. View attachment 3271138View attachment 3271139
I snagged a set of pads from the local dealer that look identical to what was in there. Cool to see the little original Toyota logo on there.
View attachment 3271140View attachment 3271142

View attachment 3271141

If you upgrade to the S13 calipers don't you have to change out the rotors as well? because the S13s require a thicker rotor?

 

[svsisu]

Looks like S13 calipers go to a T100 and do require a different rotor

 

[Blomdala]

Sorry for not getting back to this.... yes technically the rotor size is different, but it can be done without changing rotors, the pads minutely hang over the outer edge is all.