Expedition built, locked 1997 FJ80 available (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

**SOLD**


Truck: 1997 Toyota Landcruiser
Mileage: 115,000-ish
Location: Austin, TX

This truck is a 1997 Toyota Landcruiser FZJ 80 with factory front and rear locking differentials. The standard package on the 1997 FZJ 80 Landcruiser includes ABS brakes, tinted glass, intermittent wipers front and rear, cruiser control, power windows/locks, auto off headlamps & rear defrost.

The options that are included on this truck are: leather seating, power titl/sliding moonroof, aluminum wheels, front/rear locking differentials, VIP security system and lastly, floor mats.

All of the parts & maintenance that are listed below have been completed in the last year or less. The cooling, brake and air conditioning work was all completed in April.

As you can see, there were no shortcuts taken and no expense spared when building up this truck as a very competent expedition and wheeling truck. The body is straight as an arrow and there is no rust.

It has been offroad only a handful of times.

I am looking to sell the truck outright or trade for a FJ Cruiser, Highlander or 2003+ 100 series. Cash can be exchanged either way, I am open to options. I am not looking for something on anything over 33's.

To sell outright, $17,500 firm. Anything under that and it's not worth me selling it.

Cooling System:
  • OEM 3 core Radiator
  • OEM (All) heater hoses
  • OEM Fanclutch
  • OEM T-stat
  • PHH install complete
  • Toyota red coolant

Steering:
  • OEM Tie rod ends
  • OEM tie rod
  • OEM drag link ends
  • Slee HD drag link
  • OEM steering box

Brakes:
  • OEM ABS actuator
  • OEM ABS sensors (all 4)
  • OEM ABS front wiring harness
  • OEM ABS rear wiring harness (d-side)
  • OEM 100 series front brake pads
  • OEM rear pads
  • Slee extended SS brake lines from the frame to the axle AND from the axle to the caliper (complete kits)
  • DBA slotted rotors in the front
  • OEM rear rotors
  • Adjusted rear LSPV (for lift)

Air Conditioning:
  • OEM A/Compressor with clutch
  • OEM A/C condensor
  • OEM A/C dryer

Suspension:
  • Slee 4" lift
  • Old Man Emu long travel shocks
  • Old Man Emu steering stabilizer
  • Slee HD drag ling
  • Slee castor correction plates (welded)
  • Slee font pandhard adjustable
  • Slee rear panhard adgustable
  • Slee front and rear swat bar drop kits
  • Slee 2" drop bumpstops in the rear

Axles & Differentials:
  • Precision 4:88 gears installed professionally
  • Complete front axle rebuild at the time w/ all OEM bearings and seals
  • Rear axle rebuild at the same time with all OEM parts
  • Mobile 1 syn. in the diffs.
  • Transmission flush by dealer
  • OEM Center diff lock switch installed

Electrical & Lighting:
  • HIR high and low beam bulbs installed
  • Lightforce 240s with clear and yellow covers
  • Slee headlight harness
  • Slee aux. light harness
  • OEM interior aux. light swtich
  • Hella interior map/reading light
  • Hell Roaring dual battery system
  • Optima Yellow top primary battery (as recommended by Hellroaring)
  • Optima Red top secondary battery (as recommended by Hellroaring)
Bumpers, Armor & Tire Carrier:
  • ARB front bumper (winch ready)
  • Slee A/C dryer skid plate
  • IPOR (Iron Pig Offroad) rear bumper with tire carrier
  • IPOR skid plate

Tires & Wheels:
  • Toyo MTs (35's) on grey powder coated OEM alloy wheels (1 matching Toyo MT on stock spare)

Misc:
  • Scangauge II
  • Fuel pump and associated parts inc. sock.
  • Alpine CD plater with MP3 player, ipod hook up and Sirius sat. radio
  • Entire floor of the truck, front to back got Dynamat Extreme covering
  • Rear roll cage which serves as a great tie down spot and a barrier for the dog
  • Outback systems rear drawer
  • Aftermarket speakers front and rear with a decent amplifier
  • OEM cup holder
  • Custom sliders
  • Custom exhaust, tucked up and away
  • Extended diff breathers all the way up into the top of the engine bay
  • Vintage Toyota badging

More pics here: 1997 FZJ80 for Sale
truck_web.webp
 
Last edited:
I could only dream of owning such an 80.....Wish I could sell my motorcycle and Mustang to buy this bad boy!....Good luck on the sale I CANNOT believe nobody is willing to fork it over for this thing.

what kind of motorcycle is it? hmmmmm? you have a PM.

nobody has any money.

ain't that the truth. it's OK. until someone buys it I am going to enjoy this rig. i love it.
 
pete you need to list this on the AIG in house classifieds board.
 
hahahahahahahah... so true. i can put it right next to yours.
 
got laid off last week. motivated to sell. PM me reasonable offers.
 
speedracer, your PMs are full...

I am definitely not offended. I can't let it go for that little though. It does not have 3rd row seats anyway.
 
I sent you a PM, Sorry to hear about your job .:)
 
No reply?

I"m sorry , I must have missed your reply.
 
got laid off last week. motivated to sell. PM me reasonable offers.

Sorry about the job loss. Wish I could sell my Montero Sport and help you out by buying the rig! Would love it and make sure it got the use it is built for.

Good luck!
 
I am serious about this truck.
 
How many miles are on it now?

what has changed on it since April, other than milage: damage, mods, wear?

Thanks

no damage. it now has 116k on the clock. it has been detailed... that is about it. i will wirewheel the sliders soon because i want to paint them a nice flat black. when i get a new job i will get some tuff duck seat covers but that is about it. i just drive it around town is all...
 
Glad to see it is staying around here Peter!
 
The job situation is stable, buying a house, the truck is for sale again. I updated the 1st post with the details. The long and short of it is:

$17,500 firm

Anything less than that and it is not worth it for me.
 
Tie rod is in, alignment completed, rotate and balane = DONE.
 

Users who are viewing this thread

Back
Top Bottom