Dual Battery Tray for 03-09 FJC (1 Viewer)

[Moody]

Dual Battery Tray for 07-09 FJC

These will also work on the 10+ FJC, but require the removal of the 'plate'.

My friend made these up with his laser and the shop he works at. They are all bolt in (unless you have a 2010+) and are 504 Stainless Steel.


Here are some photos of a friend's FJC that has the tray for the Optima. He used the IBS System.

The nice part about these is that they require NO DRILLING!!

Installation on a 2004 Toyota 4Runner:

Take out the bolt holding the intake hose on there, and install the support bracket.

Slide the tray on in there, bolt in into place...takes all of 15-20 minutes. The bolt we used to connect to the existing hole on the wheel well was a smidgen too long, so it will be replaced with a more snug fitting one.

 

[1BiGGuy]

Looks nice.

 

[Moody]

Thanks, he does really nice work.

 

[WyoCruiser]

You might want to modify the title of your thread. The first FJ Cruiser was classified as a 2007. There were no '3, '4, '5 or '6 FJ Cruisers. Although, if you are trying to attract attention, it worked!

 

[Moody]

You might want to modify the title of your thread. The first FJ Cruiser was classified as a 2007. There were no '3, '4, '5 or '6 FJ Cruisers. Although, if you are trying to attract attention, it worked!

oops!!

It fits in the 03-09 V6 4Runners, my mistake. Fixed now.

 

[kai38]

Is he selling these? And do they fit the FJs or the 4runners?
Thanks

 

[Moody]

There are two for sale in the parts section. One for a diehard platinum and one for an optima. They fit in both. The newer 2010+ FJC requires the removal of the plate over the fender well.

 

[Moody]

https://forum.ih8mud.com/sale-parts/573250-03-09-4runner-v6-dual-battery-trays-fjc-too-slc-ut.html

The above photos of the Optima Yellow Top are in a FJC.

For more info, see this thread:

4th Generation Toyota 4Runner V6 or FJ Cruiser Dual Battery Tray