- Location
- United States
For 4th gen. 4Runners and the FJC (newer model FJC requires the removal of the plate with the bolts sticking out of it)
$160 plus shipping (About 10-15 bucks)
Support bracket:
Installed in a FJC:
The pictured tray above is for the Diehard Platinum Marine Group 34M (This is an Odyssey rebadge). There is a separate tray for the Optima group 34.
Here are some photos that should help with placement on the FJC (This is the Optima Tray):
Installation:
Take out the bolt holding the intake hose on there, and install the support bracket.
Slide the tray on in there, bolt in into place...takes all of 15-20 minutes. The bolt we used to connect to the existing hole on the wheel well was a smidgen too long, so it will be replaced with a more snug fitting one.
The install is very much the same as the FJC.
$160 plus shipping (About 10-15 bucks)
Support bracket:
Installed in a FJC:
The pictured tray above is for the Diehard Platinum Marine Group 34M (This is an Odyssey rebadge). There is a separate tray for the Optima group 34.
Here are some photos that should help with placement on the FJC (This is the Optima Tray):
Installation:
Take out the bolt holding the intake hose on there, and install the support bracket.
Slide the tray on in there, bolt in into place...takes all of 15-20 minutes. The bolt we used to connect to the existing hole on the wheel well was a smidgen too long, so it will be replaced with a more snug fitting one.
The install is very much the same as the FJC.
