Door handle plugs (4 Viewers)

[Outsane]

I made some door handle plugs for the front door, adding more stuff for the 70 series as I can.

The brown is super dark so I dont have a color match for it just yet.

 

[OGBeno]

These are still readily available from Toyota, if you didn’t know. And available in the US.

 

[Outsane]

These are still readily available from Toyota, if you didn’t know. And available in the US.

Ah poop, a friend wasn't able to find the part number.

When Toyota runs out , Ill be here.
Mine might be cheaper and faster too.

 

[OGBeno]

Ah poop, a friend wasn't able to find the part number.

When Toyota runs out , Ill be here.
Mine might be cheaper and faster too.

The part has been in continuous production since 10/1984.

It’s used today on 70 series trucks.

 

[Outsane]

09/25 for me, just finished the first run.

 

[Meshal]

Good job and those are the part numbers. Both grips got two with two different numbers.

Those for the top screw
Gray

RH

LH

Bage

LH

RH

 

[Meshal]

Those are the grips with two different sides.

GRIP ASSY, DOOR ASSIST, RH​

​

GRIP ASSY, DOOR ASSIST, LH​

GRIP ASSY, DOOR ASSIST, RH​

GRIP ASSY, DOOR ASSIST, LH​

 

[Meshal]

The screw, you need two for each side

 

[Meshal]

Bottom cover, one number for each side
Gray

Bage

 

[Outsane]

Cool! @Meshal

The brown ones I have are much darker, I think my normal dark brown would closely match those handles.

 

[Meshal]

Yeah, most of the brown parts for the 70 series are disconnected. Brown Came from 1985 to 89

 

[Meshal]

More on the brown parts in this list

https://www.amayama.com/en/genuine-catalogs/epc/toyota-general/land_cruiser/FJ73L/4500/body/7451

 

[EngineBlockEggs]

Yeah, most of the brown parts for the 70 series are disconnected. Brown Came from 1985 to 89

I have a 1997 HZJ77 with a brown interior, Toyota calls it “oak.”

 

[Meshal]

He is talking about the SEPIA BROWN

I have a 1997 HZJ77 with a brown interior, Toyota calls it “oak.”

 

[RHINO]

Outsane, having the other older colors is great. thanks

 

[Outsane]

He is talking about the SEPIA BROWN

I will have to start looking for a good filament to match the Sepia Brown

 

[Outsane]

Best color match so far for Sepia, needs a little less red but still good.

 

[Meshal]

try this product with its color

Color Coat™ Aerosols | 15023 | SEM Products

Color Coat™ restores or changes the color of most vinyl surfaces, flexible and rigid plastics, carpet and velour.

semproducts.com

 

[Outsane]

That works, but I dont want to paint anything. Paint can flake off. You are welcome to paint if the color doesn't match closely enough.

 

[JuanJ]

Hello,

For what it is worth, grey plastic parts have remained more or less the same over the years.

Brown parts, not so much. If I remember correctly, pre-1999 brown is referred to as "sable" and it is dark. Post-1999 brown is referred to as "oak" and has a lighter tone.

Therefore, dark brown plastic parts are older than light brown ones.






Juan