Diode Dynamic LED's (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 7, 2010
Threads
217
Messages
657
Just wondering if there's any tips or tricks on installation of their bulbs. I got a pair of their SL2 Pro's for my 100 series. Took me about 90 min. to install primarily due to having to align the rotation with the adjustable ring gasket. Especially the driver side because I was too lazy to remove the battery that's taken most of the working space behind the light housing. Also on passenger side the rubber flap that covers back of the plug broke off due to age. Is there some other way to give the plug/harness at back of the bulb some protection during wet weather or light stream crossing?
Other than that the DD bulbs are so far performing to their claim.
Thanks.
 
I just installed these as well and they’re great! I had no problems installing them in under 10 minutes. I didn’t remove the battery - just took off the battery strap and slid it back a bit.

I have a 98 with glass lenses.

Now to do the fogs and DRLs
IMG_0067.jpeg

IMG_0068.jpeg
 
The gasket ring was loose out of the box so maybe it threw off the orientation. With the three diff sizes tabs behind the housing it took several tries to get them right. I also have glass lens.
 

Users who are viewing this thread

Back
Top Bottom