Build DINGO- 60FZJ-UTE LS3 EROD (PROVEN CA SMOG)

Member Builds and Stories

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Sprayed the base bed this morning. 3 coats of epoxy, 3 coats of Genesis under and 3 coats topside.

It's 5'oclock somewhere!!
PXL_20221008_170900461.webp
PXL_20221008_173356719.webp
PXL_20221008_160029645.webp
 
Looking good!
There's an 80 or 4R peeking out in one photo above. It has some gallon jugs on the gate. paint color looks interesting. Can you share a full side profile pic of that rig too?
 
Looking good!
There's an 80 or 4R peeking out in one photo above. It has some gallon jugs on the gate. paint color looks interesting. Can you share a full side profile pic of that rig too?

Just another 60 in the TTC shop.

PXL_20210914_225042157.webp
PXL_20221004_201501986.webp
 
Nowdays a 1980s Cali smog vehicle is dam near impossible to install a motor & be legal.
I dont know what loophole or wording etc. how its done, but when it's my turn I'm going the Trail Tailor 5.3 route.
Not sure it needed a Cali plate to be legit!! Just saying!
 
Last edited:
Back
Top Bottom