Desmog components (3 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Jim,

Looking to get a carb, dizzy, and full desmog kit.
I have a 1987 fj60. I was wondering what the turn around would be and the prices. Do i send you my carb and dizzy or do you have a stock pile of parts that you rebuild as the demand dictates.
Thanks ahead for the assistance.
 
Fire fire, dissy rebuild

Hi Jim, saw in a post you said as fire or otherwise to get yur attention. Good idea. I was just wondering if you even got my dissy from the 10th of the month, I had emailed you. I know your a busy fellow, just inquiring. Possible I missed a response. :confused: Thanks.
 
Dan, Yes, a dissy is here from Montani.
An email will be sent after it's checked out.

All other desmog parts orderes are shipped as of this AM.

We're getting a bit low on the EGR plugs, dunno if/when I'll be getting more of those.
 
Hey Jim -- finally getting closer to putting the carb i got from you on and wanted to know your opinion for the heat riser - leave it oem or put in a block off plate (also do you just recommend the 2 gaskets and heat riser and no rtv between the manifolds)
 
If it is working, then leave it alone.

If it has any issues that require separating the manifolds, then I would consider welding the butterfly shaft in the hot bypass position and installing the stainless steel solid plate from SOR.

It needs the thickness of 2 gaskets and a separator plate to get the half holes to line up on the manifold flange.
 
Last edited:
Idler pulley paid for on Paypal.
Cheers
 
on the intake manifold - what attaches to the two small air things coming out of the intake manifold - one has black plastic tubes and the other is a metal funny looking with 2 metal tubes coming out of it -- trying to get this thing to run with the new carb and dizzy - Heath
 
also do you know of a good link so i can hook the hoses back up with your carb desmog and dizzy rebuild thanks
 
I would like to order the egr blok off. Where do I pay pal and how soon can it be shipped. Do you have carbs and dizzys for a 77 in stock or is it a long wait to have them rebuilt and shipped back?
 
Paypal $35 to my 'Mud name at gmail.com and the EGR blockoff will be on the way.

No, I do not stock parts. I repair/service/rebuild Cruisers and components on a custom basis. It's a 3-4 week turnaround on carbs right now. Dissys are a little quicker, but odds are a 1977 dissy has a dead vac advancer, and they are disco'd, meaning most 75-80 dissys are now paperweights.
 
Payment sent. Looks like I should find a new dizzy and carb to send you so I don't go with out driver my 40.
 
Hi Jim I am very interested in buying the hole desmog kit (Pulley, plugs, and egr block off plate). If $149 is the correct price with shipping my order will be in very soon. Thanks for your time. :)
 
low idle at start up

hey jim everything installed from you - at start up now is very low rpm around 300 (would this be timing is off some - used a cheap harbor frieght timing light) but when warms up stays normal rpm range -- just wondering thanks
 
Payment for idler assembly sent.

Carburetor working great Jim, thank you.
 
maxfj60 said:
Hi Jim I am very interested in buying the hole desmog kit (Pulley, plugs, and egr block off plate). If $149 is the correct price with shipping my order will be in very soon. Thanks for your time. :)
Click to expand...

You are correct, sir! PP $149 and the whole kit of stuff will be on the way.

Poser said:
Payment for idler assembly sent.
Click to expand...
Thanks Poser, your pulley is in the outgoing mail bin.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 4 (members: 0, guests: 4)

Share this page

Back
Top Bottom