how in the F$%K do you get the C-clips out of a Dana 44?
If it matters it is on a 1999 Isuzu amigo.
If it matters it is on a 1999 Isuzu amigo.
dana 44 help
- Thread starter 68 just-parts
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
splitshot
Head cook, Bottle washer, and Peace keeper.
Did you remove the shaft that holds both the pinion (small) gears out?
tap on outer side of the axel shaft they should drop out!
both 2 and 3
pb4ugo
SILVER Star
A dana 44 should'nt have C clips. Axles are held in by the outer bearing and retainer on the end of the axle tubes, behind the brake shoes.
my dana 44 has C clips... i guess mine must be custom! 
Take out the spider gears first, it should be pretty easy! Then tap the axel shaft and the c clip should pop right out and fall in the bottom of your housing
Take out the spider gears first, it should be pretty easy! Then tap the axel shaft and the c clip should pop right out and fall in the bottom of your housing
pb4ugo
SILVER Star
Sorry for the mis information. I didn't realize Isuzu used a C Clip dana 44.
Custom? Sounds like it needs to be customized.
my dana 44 has C clips... i guess mine must be custom!
Custom? Sounds like it needs to be customized.
did you get this thing apart 68... im interested to see how you did it!