CUSTOM BUMPERS FOR SALE (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

LS1FJ40 said:
The top secret plan for the swing out. Nobody has ever had one built like how I want it built. If you can't remember, it's cool, I'll remind you when it's time.
Click to expand...
There isn't going to be a royalty charge involved in this is there?!?
 
As promised here it is all tacked up and ready to go through my week SIT STAGE..

Still need to finish the wing reinforcements and the recovery points. Will do that on Monday before I start taking the rear bumper off.

Thanks all,

Jason

SAM_0117.webp
SAM_0114.webp
SAM_0108.webp
SAM_0125.webp
SAM_0113.webp
 
Holy heck.......

Can you post a picture of a box where the winch would sit height wise and stuff just to get an idea of how high it sits in there please. Thanks.

Looking good man. Really want one here really soon before I head out West in March / April for fire season.



Sent from my SM-G920V
 
krzyabncanuck said:
Holy heck.......

Can you post a picture of a box where the winch would sit height wise and stuff just to get an idea of how high it sits in there please. Thanks.

Looking good man. Really want one here really soon before I head out West in March / April for fire season.



Sent from my SM-G920V
Click to expand...

The ComeUp 12.5 sits LOW in the saddle (ANY WINCH). I'll get a pic up this weekend for you. Here is the ComeUp 9.5s when I started getting everything together.

J

SAM_0089.webp
 
I like even more now. Please put me in line for a front please.

Sent from my SM-G920V
 
I think it will with that attention to detail around the flares which I will still be running.

Sent from my SM-G920V
 
reevesci said:
As promised here it is all tacked up and ready to go through my week SIT STAGE..

Still need to finish the wing reinforcements and the recovery points. Will do that on Monday before I start taking the rear bumper off.

Thanks all,

Jason

View attachment 1199889 View attachment 1199890 View attachment 1199891 View attachment 1199892 View attachment 1199893
Click to expand...


I like it. Great minds think alike ! Our design is very similar. I really like how you transitioned under the stock flairs. Nice job man. Can't wait to see how the rear comes out as I'm mid way through my design.
Keep up the great fab work!
 
RDC76 said:
I like it. Great minds think alike ! Our design is very similar. I really like how you transitioned under the stock flairs. Nice job man. Can't wait to see how the rear comes out as I'm mid way through my design.
Keep up the great fab work!
Click to expand...

Rich, I'll have to go find yours again and compare. I saw it a few months back. IMO, the really good designs for any older cruiser are very similar. Its the little pieces here and there that bring them further along. The wing/flare seem to always get left behind and it always sticks out like a sore thumb to me. Most probably don't notice it or care, but just that little extra brings it all together IMO...

My rear is very simple and I should have it knocked out by the end of next week.

J
 
Well, I have been missing out on the 80s bumper build! That extra move on the end wing and the flare line is a form of passion!
Can't wait to see a rig with this armor in place!! As always, an awesome job there, Jason!

Sent from my Xperia Z2
 
reevesci said:
Rich, I'll have to go find yours again and compare. I saw it a few months back. IMO, the really good designs for any older cruiser are very similar. Its the little pieces here and there that bring them further along. The wing/flare seem to always get left behind and it always sticks out like a sore thumb to me. Most probably don't notice it or care, but just that little extra brings it all together IMO...

My rear is very simple and I should have it knocked out by the end of next week.

J
Click to expand...
I agree. And have always admired and respected your work and huge contributions to the cruiser community. By no means when I said similar was that ment in any harmful way...just to be clear as we've never really talked and don't know each other. You are the only fabricator I have ever recommended someone too when I wasn't able to help them due to the distance between he and I. It was another mud member a couple months back that wanted a 60 series bumper. Anyways just wanted to say nice work as always and clear the air if it was unclear where I was coming from. Carry on with the great fab and service!
 
RDC76 said:
I agree. And have always admired and respected your work and huge contributions to the cruiser community. By no means when I said similar was that ment in any harmful way...just to be clear as we've never really talked and don't know each other. You are the only fabricator I have ever recommended someone too when I wasn't able to help them due to the distance between he and I. It was another mud member a couple months back that wanted a 60 series bumper. Anyways just wanted to say nice work as always and clear the air if it was unclear where I was coming from. Carry on with the great fab and service!
Click to expand...

No harm or foul. The two designs have a couple of similarities, but are definitely different, IMO. I never saw your bar work until you just posted your latest thread, yet similar to my 60 series, funny.

As I stated before, keep up the good work.

J
 
Your design almost makes me regret deflaring but to be honest I'm happier without them as I would have already ripped them off on some trails this fall.
 
warezdog said:
Your design almost makes me regret deflaring but to be honest I'm happier without them as I would have already ripped them off on some trails this fall.
Click to expand...


No worries. Once I let the bumper sit for a week and I like everything I will "clip" one side for a NON-FLARE rig. Then send the 2 in 1 bumper to the laser cutter for reverse engineering.

J
 
warezdog said:
There isn't going to be a royalty charge involved in this is there?!?
Click to expand...

Hahaha. Nah. I doubt many will want what I want specifically. But it will open the door to other ideas that people will want. I'm super excited. I'm back to making good money now so I'm excited to be able to finally do this!
 
krzyabncanuck said:
Holy heck.......

Can you post a picture of a box where the winch would sit height wise and stuff just to get an idea of how high it sits in there please. Thanks.

Looking good man. Really want one here really soon before I head out West in March / April for fire season.



Sent from my SM-G920V
Click to expand...


D, here are a few winches installed in the new 80 front. Got to it as soon as I could for you. Also a couple with a LED BAR!

If the ComeUp 16.5 was just 5/8" shorter... :rolleyes:

Jason

ComeUp 9.5s

SAM_0141.webp



Superwinch 8500 and 10000

SAM_0144.webp



ComeUp 12.5 (out of the box the 12.5 clutch will need to be "cocked" up or to the back position) otherwise PLENTY of room.

SAM_0147.webp


With LED BAR!

SAM_0154.webp

SAM_0149.webp
 
Last edited:
You must log in or register to reply here.

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom