Ok great cool thread idea. WHERE IS MY REFUND??
-
Vendor Archive
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #62
Hi Matt - Can you provide a status on my two orders?
- Order #4995 - (10/13/23)
- Order #5100 - (09/15/23)
Thank you for making what no one else has...
- Order #4995 - (10/13/23)
- Order #5100 - (09/15/23)
Thank you for making what no one else has...
- Thread starter
- #64
good morning joel ,
i will return here later this morning with complete details for #4995 & #5100
kindly ,
matt
Good morning, Matt. Did you see my post (#60) in regards to my ignition kit, as well as the two credits I am waiting on?
- Thread starter
- #66
yes i did late last night ...
i will PM you here later this morning , and we will get those topics wrapped up for you .....
thanks
Any Update on #4679
- Thread starter
- #68
- Thread starter
- #70
that’s because I forgot to hit save on my reply above
, after I posted the pics of both your orders below 
… .. sorry about that ..here are your parts , they are now packed & boxed up with both care and concern as I do all my “ details that matter most “ parts I hand-craft myself …
Thank you very much for your support Joel ….
If you have any pre-install tech. questions please reach out to me in MUD PM ….
- I personally use my pull switch knob set’s in my right hand , and I have a small 5”ish x 5”ish single layer of common clean
% cotton T-shirt fabric in my left hand …,This well evolved technique I use to do any final install of any Land Cruiser knob or gizmos that require 2 hands and a metal install “ thing “ of any kind give you both a kid-glove-like death-grip ability when you need it where you need it …. such as final plumb , level & eye-ball square of all switch panel knobs ….
this approach works , please try it ….
Kindly ,
Matt
Hi Matt,that’s because I forgot to hit save on my reply above
here are your parts , they are now packed & boxed up with both care and concern as I do all my “ details that matter most “ parts I hand-craft myself …
Thank you very much for your support Joel ….
If you have any pre-install tech. questions please reach out to me in MUD PM ….
- I personally use my pull switch knob set’s in my right hand , and I have a small 5”ish x 5”ish single layer of common clean
This well evolved technique I use to do any final install of any Land Cruiser knob or gizmos that require 2 hands and a metal install “ thing “ of any kind give you both a kid-glove-like death-grip ability when you need it where you need it …. such as final plumb , level & eye-ball square of all switch panel knobs ….
this approach works , please try it ….
Kindly ,
Matt
That makes sense, I've done that many times as well.
Great install technique suggestions. You can be sure I will follow them for a flawless and finished installation of the parts.
You mentioned pics, did I miss them? Sorry if this is something obvious I am not seeing (rookie on the channel). Is this something that requires a membership?
Appreciate the update and love the personal touch communication..!
Joel~
- Thread starter
- #72
Last edited:
Cruiser804
SILVER Star
Hi Matt, any update? thanks, jon
- Thread starter
- #75
Hi john ,
Both stand alone orders have been shipped …
I was able to carefully pack-up all parts in one box , the credit back to you is for the adjusted shipping surplus amount only , not a un-fulfilled parts topic …fyi
Thanks
Matt
- Thread starter
- #76
your complete order has been shipped Craig ,
wiring instructions included as discussed ,
- plenty 3-M crimp , heat shirk marine grade butt connectors in box
final bench test of your exact switch as always , ....pic below
thanks
matt
.
- Thread starter
- #78
hi Gordon
your order #5854 has shipped ,
below is the TECH. thread link we discussed earlier that u asked me about .......
thanks for your support
matt
.
Refreshing your 60 Series Gasoline or DIESEL Alternator Connections Connectors Rubber Boots Ring Terminals Mounting Hardware 33+ Years Later and Why
Refreshing your 60 Series Gasoline or DIESEL Alternator Connections Connectors Rubber Boots Ring Terminals Mounting Hardware 33+ Years Later and Why : i will go over my recent experience and what i discovered on GHOST's 3FE 5/89 - digging hardened then hard in JAPAN to find the original...
forum.ih8mud.com
Matt any update on my switches since you won't answer the DM thread you asked me to start?
tex45
SILVER Star
Similar threads
