Cape Fear Electronics (5 Viewers)

[procomsignathid]

Curious if you have any notion on the Yazaki part numbers for the green-colored 1, 2 and 3-pin connectors in the engine bay (fuel cut solenoid, igniter/coil/carb fan, and 3-pin voltage regulator/alternator connectors). (or do you have any for sale) They seem impossible to find.

Also, do you have any inventory / a good source on headlight switches with the integrated rheostat for dimming?

 

[Engineer8000]

I have been working with this Toshiba T2333 IC recently. I have not been able to find a datasheet for this so it may be a special made IC for DENSO. This is used in some of the 80s AC amplifiers. It is basically a dual comparator with some extra functionality.

 

[Engineer8000]

Curious if you have any notion on the Yazaki part numbers for the green-colored 1, 2 and 3-pin connectors in the engine bay (fuel cut solenoid, igniter/coil/carb fan, and 3-pin voltage regulator/alternator connectors). (or do you have any for sale) They seem impossible to find.

Also, do you have any inventory / a good source on headlight switches with the integrated rheostat for dimming?

The Toyota PN can be found using the harness repair manual. The Yazaki PN takes some research, sometimes a lot of research. I have a few connectors I keep on hand for repairs but do not stock them for sale. Vintage Teq Parts is the best resource for original connectors and OEM switches that I know.

 

[procomsignathid]

Do you by chance have a lead on a harness repair manual (or any for sale) for a 78 FJ40? Googling has not done me any favors on that front (I have engine / chassis repair manuals but I don't see part #s)

 

[Engineer8000]

Here is one version for example. You probably can find more using the wayback machine.

Toyota Wire Harness Repair Manual 1991-2005 : Toyota : Free Download, Borrow, and Streaming : Internet Archive

PDF originally posted to MWP's Toyota Celica GT4 Documents & Media

archive.org

 

[Andrew S]

I received these today. These work with the Yazaki ( and probably others) CN 250 (6.3mm) tang style terminals. I am going to keep 2 of these and sell the other 3.

Russ, I'd be interested in one of those tools when you're ready to sell. Thanks!

 

[samc2447]

Vintage Teq Parts is the best resource for original connectors and OEM switches that I know.

I think it's worth noting that there are many many problems with this supplier, and would not advise doing business with them. If you're bored here's a link to the more than 14 bad seller threads VTEQ bad seller threads

 

[Engineer8000]

Sorry, my intention was not to ignite an anti Toyotamatt discourse here. My intent was to pass information. Please do not use this area to torch any particular vendor.

 

[samc2447]

Sorry, my intention was not to ignite an anti Toyotamatt discourse here. My intent was to pass information. Please do not use this area to torch any particular vendor.

Not torching anyone. Just passing along information. And FWIW he's not on this site anymore.