- Thread starter
- #241
I generally stay away from the ignition stuff due to liability. I will check the 76 manual for any troubleshooting ideas.
Cape Fear Electronics (7 Viewers)
- Thread starter Engineer8000
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Awesome anything you can do will be helpful. I have some ability but just a multimeter to test with. Thanks
- Thread starter
- #243
Finished the RS3000 tester today.
Last edited:
- Thread starter
- #244
I received this in the mail this week
Got it and thanks for the information. My problem start with an intermittent ignition issue. One new distributor and pentronix ignition later and I have no spark. Pentronix helped me figure out I received a bad unit and I have an igniter II on the way. Not real excited about the electronic system now that I have already had a bad part so I may be looking at going back original if it doesn’t work out.
- Thread starter
- #246
I got this extractor tool for these tiny Molex connector terminals.
- Thread starter
- #247
I'm finally going to do something with these in 2025.
- Thread starter
- #248
And these.
I have an original speaker from a 78. FJ40 would like for you to restore if that’s a possibility. Let me know.
- Thread starter
- #250
Sorry I do not do restorations, I only repair. Thanks for asking.
It only needs to have the paper cone repaired. The paper is torn
- Thread starter
- #252
Post up a picture so I can see what you have there.
Here you go.
- Thread starter
- #254
Is the voice coil still intact? To be honest I have not done much speaker cone repair and you may not be happy with the results.
They don't do it, but, if you Discord with them, you might find someone who does...
skylabsaudio.com
Services
It comes with a heavy heart that, effective immediately, Skylabs is ending receiver, amplifier and turntable service/repairs for equipment NOT purchased from Skylabs. In addition, we will no longer be providing a speaker re-foaming service. We will, however, continue to service the vintage...
skylabsaudio.com
- Thread starter
- #256
Re-foaming is pretty straight forward and have done that many times, repairing the cone or re-coning is another story,
- Thread starter
- #257
Testing 81 2F Carb fan control.
- Thread starter
- #258
Interesting 1965 patent for evap system
- Thread starter
- #259
I never really thought about it but the 70's hazard switch waffle plugs are interchangeable, the switch side and harness side plugs are the same:
Ackcruisers
SILVER Star
Yes. And the terminals are no where to be found in the world. The connectors and terminals are very strange. You may know the electrical reason?