Can someone provide these dimensions for an FJ40, FZJ80, and a FJ45 truck? (1 Viewer)

[ramdough]

Can someone provide these dimensions for an FJ40, FZJ80, and a FJ45 truck?

I am looking at a chassis/body swap.

I need:

1. The Distance from the front axle to the front of each vehicle body.

2. The distance from the front axle to the rear of each Cab.

3. The distance from the front axle to rear axle (I know I can look this up, but if you know items 1 and 2, then I imagine 3 is from the same source).

Thanks in advance.

 

[Isotel]

TLC - Toyota 4x4 Land Cruisers

this should get you #3, and if you do some math, get you close on #1, and #2..

Otherwize break out a tape measure!

 

[GulfShoresFJ60]

Don't know if you've seen these, but these sound like what you are trying to make.

FJ45:
https://forum.ih8mud.com/hardcore-corner/34899-project-x.html

FJ40:
https://forum.ih8mud.com/hardcore-corner/264922-fzj40.html

 

[friel01]

also this one

https://forum.ih8mud.com/80-series-tech/265597-old-school-80-series.html

you are going to need a lot of measurments beyond the ones you asked for! Don't let that stop you though.

 

[ramdough]

Thanks for your responses. What I am trying to figure out is how much room there would be to take an FJ40 body, remove the fender wells, install a strait rear bench seat, extend the frame one foot, then add a camper like this one......


https://forum.ih8mud.com/expedition-builds/245430-travelling-cruisers.html


Those links are helpful to get some perspective, but I really need those dimensions.

Can someone run out to your rig with at tape measure.... I only need to know within an inch or so?

Thanks,