I am in need of a 3 speed t-case, rebuildable condition would be fine. I live near Pikeville & work in Chatt. Please PM me if you have one available.
Jason
Jason
Buyin', Sellin', Tradin'
- Thread starter Hugh Heifer
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Nooooooo....... dang man I wish we could swing it just to keep it local. You looking for something with more creature comforts?
Wow, dude. That rig is a beast ! GLWS!
Joel
Joel
BGarcia88FJ62
SILVER Star
Stuff I'm offloading.
All prices are negotiable, All offers will be considered, Local pick up would be preferred and more than willing to meet anywhere around Georgia, Alabama, Tennessee, North/South Carolina. I'll be more than happy to ship any item at the purchasers expense. I Guess I'm limited to 5 Pics Let me know if y'all have any questions or would like to see pics of anything specific I got a bunch.
I have a 2F PO spun a bearing, I don't believe it overheated, I haven't been into it at all, The head is in great shape, valve train is very clean. Block looks good. $350.00
I have another 1980 2F that was been completely disassembled for a rebuild, Everything has been bagged and tagged, Bearing caps, Pistons and rods have been stamped for reassembly. This was a running motor prior to being pulled approximately 160-170 K all the parts look to be in good condition in need of cleaning and a rebuild. $450.00
Bell Housing and Fly Wheel $45.00
1980 H42 4 Speed $175.00
1980 Split Transfer Case (Disassembled for Rebuild) $225.00
2F Carb Insulator Plate $35.00
1980 Carb (Needs Rebuild) $125.00
Intake Manifold $150.00
(2) FJ60 Long 30 Spline Axle Shafts $40.00 Ea.
(1) FJ60 Short 30 Spline Axle Shafts $25.00 Ea.
Left and Right Front Seats $50.00 Ea.
Rear Seat Upper $175.00
Rear Seat Lower $100.00
Dual Battery Mount (Optima or similar size AGM) $50.00
All prices are negotiable, All offers will be considered, Local pick up would be preferred and more than willing to meet anywhere around Georgia, Alabama, Tennessee, North/South Carolina. I'll be more than happy to ship any item at the purchasers expense. I Guess I'm limited to 5 Pics Let me know if y'all have any questions or would like to see pics of anything specific I got a bunch.
I have a 2F PO spun a bearing, I don't believe it overheated, I haven't been into it at all, The head is in great shape, valve train is very clean. Block looks good. $350.00
I have another 1980 2F that was been completely disassembled for a rebuild, Everything has been bagged and tagged, Bearing caps, Pistons and rods have been stamped for reassembly. This was a running motor prior to being pulled approximately 160-170 K all the parts look to be in good condition in need of cleaning and a rebuild. $450.00
Bell Housing and Fly Wheel $45.00
1980 H42 4 Speed $175.00
1980 Split Transfer Case (Disassembled for Rebuild) $225.00
2F Carb Insulator Plate $35.00
1980 Carb (Needs Rebuild) $125.00
Intake Manifold $150.00
(2) FJ60 Long 30 Spline Axle Shafts $40.00 Ea.
(1) FJ60 Short 30 Spline Axle Shafts $25.00 Ea.
Left and Right Front Seats $50.00 Ea.
Rear Seat Upper $175.00
Rear Seat Lower $100.00
Dual Battery Mount (Optima or similar size AGM) $50.00
I am in the market for a set of knuckles, manual hubs and cv's from a 1st gen tacoma 96-04. If anyone knows anybody doing a SAS or parting one, let me know.
Thanks
Thanks
I'm looking for a 4runner ( no ifs ) that's ready to go . I'm really not into buying projects .
My 40 has found a new home back in FL ( believe that ) . The 4runner I had my eye on sold 3 days ago ( day late and a lot short ) so now I'm back on the hunt .
Thanks
My 40 has found a new home back in FL ( believe that ) . The 4runner I had my eye on sold 3 days ago ( day late and a lot short ) so now I'm back on the hunt .
Thanks
Rocky you looking for a 1st gen, or just a solid axle rig? I will keep my eyes open
SAS rig , I've had the ifs and just don't care for it much .
Thanks
A car dealer in Cleveland , TN has a nice "97" 40th anniversary 80 asking 5200 .
Putting this out there for MUD members as we don't care for the hassel of CL right now, but Erin is thinking about selling her Sami.
Specs:
1988 Suzuki Samurai
Propane Conversion - 2 40# tanks included
Spring over conversion with new OME 2" springs all around
Completely rebuilt rearend
SKY high steering conversion
NEON buckets
30x9.50-15 TSL SX Bias tires
4.16 T-case gears with Twisted TT shift rails
Essentially Off-Road Sliders
New Bosal Exhaust
Build thread is here for those who might have missed it: https://forum.ih8mud.com/threads/brownie-gets-a-new-mom-and-dad-erins-sami-build.765043/
Got a complete front end knuckle rebuild kit in the box and I am sure there are other things that would go with it as well.
It isn't tagged and would need signals and brake lights to be street legal, but that could be done relatively easily if that was a deal breaker.
$4000.00
Specs:
1988 Suzuki Samurai
Propane Conversion - 2 40# tanks included
Spring over conversion with new OME 2" springs all around
Completely rebuilt rearend
SKY high steering conversion
NEON buckets
30x9.50-15 TSL SX Bias tires
4.16 T-case gears with Twisted TT shift rails
Essentially Off-Road Sliders
New Bosal Exhaust
Build thread is here for those who might have missed it: https://forum.ih8mud.com/threads/brownie-gets-a-new-mom-and-dad-erins-sami-build.765043/
Got a complete front end knuckle rebuild kit in the box and I am sure there are other things that would go with it as well.
It isn't tagged and would need signals and brake lights to be street legal, but that could be done relatively easily if that was a deal breaker.
$4000.00
TeddyBoy
Knighted by the King of MUD himself
Boo!
Please don't say you're looking for something with an auto trans...
No, actually looking to bolster the farm fund.
I need to build a garage and need to rent some equipment to do some clearing and grading. Being a grown-up sucks sometimes 
So I guess I could say would consider trade for a skid-steer or back-hoe and $$ to make up potential difference.
SOLD
I have a Marlin Crawler rebuild kit for a SF 9.5" rear axle. Should fit 40/60 and early 80 (73-92) if anyone is interested.
Marlin site: https://www.marlincrawler.com/axle/rear-axle-parts/land-cruiser-rear-axle-rebuild-kit
Been sitting on a shelf still in the original packaging. I never opened it since I decided to do the FF swap. $30 plus the ride if anyone is interested.
I have a Marlin Crawler rebuild kit for a SF 9.5" rear axle. Should fit 40/60 and early 80 (73-92) if anyone is interested.
Marlin site: https://www.marlincrawler.com/axle/rear-axle-parts/land-cruiser-rear-axle-rebuild-kit
Been sitting on a shelf still in the original packaging. I never opened it since I decided to do the FF swap. $30 plus the ride if anyone is interested.
Last edited:
I'll take it Matt.
...via IH8MUD app
...via IH8MUD app
Oh well
...via IH8MUD app
...via IH8MUD app
FOR SALE
1985 Complete 22R ( minus flywheel ) . Still in truck for now so you can here it run .
I will also have a good 1985 straight axle ( with springs ) pickup frame . Cab comes with but will needs some attention .
I will also have two 86 model automatic trans w/ transfer ( out of 86 4Runner ) plus shifters and linkage .
2 buck seats
I'm also looking for a good work bench and up right storage cabinet ( metal )
Garage is almost done just waiting on electrician now .
Make Offer .
1985 Complete 22R ( minus flywheel ) . Still in truck for now so you can here it run .
I will also have a good 1985 straight axle ( with springs ) pickup frame . Cab comes with but will needs some attention .
I will also have two 86 model automatic trans w/ transfer ( out of 86 4Runner ) plus shifters and linkage .
2 buck seats
I'm also looking for a good work bench and up right storage cabinet ( metal )
Garage is almost done just waiting on electrician now .
Make Offer .
Last edited:
RSHARPfzj80
Appalachia Cruisers
https://forum.ih8mud.com/index.php?threads/For-Sale---Wanted---Free---Trade.757187/#post-9296458
EDIT..... SOLD
TLCA #13178 Appalachia Cruisers, STLCA
EDIT..... SOLD
TLCA #13178 Appalachia Cruisers, STLCA
Last edited:
WTB full floater non-abs rear axle.....
LAST CHANCE ....
I still have a 85 solid front axle pickup .
Bad .... body is very rough
Good .... both axle assy are complete , complete running 22r , frame is solid , a/c truck (all still in tact ) will also get one good auto trans out of my 86 4runner and one auto trans not sure if its good or not . Plus misc. items in bed of truck (Toyota parts I do not want ) . I sure there's more just don't remember . No trans or transfer case ( now in 4 runner ) .
Make reasonable offer .
All goes at the same time I not going to nickel and dime it out .
I am planning on hauling it off next weekend . So if you want it don't wait shoot me a pm .
I still have a 85 solid front axle pickup .
Bad .... body is very rough
Good .... both axle assy are complete , complete running 22r , frame is solid , a/c truck (all still in tact ) will also get one good auto trans out of my 86 4runner and one auto trans not sure if its good or not . Plus misc. items in bed of truck (Toyota parts I do not want ) . I sure there's more just don't remember . No trans or transfer case ( now in 4 runner ) .
Make reasonable offer .
All goes at the same time I not going to nickel and dime it out .
I am planning on hauling it off next weekend . So if you want it don't wait shoot me a pm .
Repost from a long time ago. Cold weekend in garage and found out I still have these.
I have 5 wheels I pulled off my 40
15x10 white steel wagon
centers
lugs
2 small spacers that were on the front......not sure you need them but P.O. had them on it.
$125.00
Dalton, GA
https://forum.ih8mud.com/tires-wheels/403817-5-15x10-white-wagons-nw-georgia.html
Another necro bump